Vibratsiooniline poleermasin

CORMAK PVT2.3KG

CORMAK PVT2.3KG Vibratory Tumbler

The CORMAK PVT2.3KG Vibratory Tumbler is designed for polishing, rust removal, degreasing, and deburring of small components. The 250 mm diameter bowl and maximum load capacity of 2.3 kg allow small workpieces to be processed using appropriately selected finishing media.

Main Advantages of the PVT2.3KG Vibratory Tumbler

The vibratory tumbler enables surface finishing of multiple workpieces in a single batch. Depending on the finishing media used, the machine can operate as a vibratory deburring machine or be used for cleaning and polishing.

The selection of abrasive media and processing time should take into account the material, geometry, and surface condition of the workpieces.

Four applications: polishing, rust removal, degreasing, and deburring.

Maximum workpiece diameter of 178 mm – defines the maximum permissible size of the workpiece.

Ø 200 mm bowl opening – provides easy access for loading and unloading workpieces.

230 V / 50 Hz power supply – allows connection to a standard single-phase electrical supply.

Compact dimensions of 250 × 250 × 400 mm – make it easy to position the machine at a workshop workstation.

Construction and Finishing Technology

The machine is equipped with a motor with an S1 continuous-duty power rating of 30 W and a bowl with a height of 115 mm.

Gusde Aigu Sopfx Abmsi
The finishing process uses vibratory motion and contact between the workpieces and the finishing media.

The tumbler is designed for use with plastic finishing media containing abrasive additives.

Processing Time and Quality Control

The approximate degreasing time is 30 minutes, while rust removal typically takes 2 to 6 hours.

The actual processing time depends on the degree of contamination, corrosion, and the type of finishing media selected.

The results should be monitored during the processing cycle, adjusting its duration to achieve the required surface finish.

Applications

The vibratory tumbler is suitable for workshops and manufacturing facilities performing finishing operations on small components.

As a vibratory deburring machine, it assists in removing burrs and sharp edges. It can also be used to clean components before further processing operations.


Technical Specifications

Motor power (S1)

30 W

Power supply

230 V / 50 Hz

Dimensions

250 × 250 × 400 mm

Sound pressure level

70 dB(A)

Net/gross weight

4.2 / 4.8 kg

Shipping dimensions (W × L × H)

280 × 280 × 400 mm


Standard Equipment

Bowl with lid.


Finishing Media Not Included

Abrasive media / plastic finishing media – not included in the set.