Materjalilaua katsetusmasinadZwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
Materjalilaua katsetusmasinad
Zwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
fikseeritud hind lisandub käibemaks
27 500 €
Seisund
Kasutatud
Asukoht
Borken 

Pildid näitavad
Kuva kaart
Andmed masina kohta
Hind ja asukoht
fikseeritud hind lisandub käibemaks
27 500 €
- Asukoht:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A20951877
- Viitenumber:
- 24974
- Värskendus:
- viimati kuupäeval 15.01.2026
Kirjeldus
Zwick / Roell
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Hnodpsx Up Igofx Abfjg
Rated test force: 20 kN
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Hnodpsx Up Igofx Abfjg
Rated test force: 20 kN
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Saada päring
Telefon & Faks
+49 2861 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga





















