KallurpoolhaagisSTAS
OP 10.60 52m³
Kallurpoolhaagis
STAS
OP 10.60 52m³
fikseeritud hind lisandub käibemaks
10 870 €
Seisund
Kasutatud
Asukoht
Korschenbroich-Glehn 

Pildid näitavad
Kuva kaart
Andmed masina kohta
Hind ja asukoht
fikseeritud hind lisandub käibemaks
10 870 €
- Müüja asukoht:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Saksamaa

Helistada
Tehnilised andmed
- Telje konfiguratsioon:
- 3 teljed
- Esmane registreerimine:
- 07/2000
- Laadimisruumi pikkus:
- 10 600 mm
- Laadimisruumi laius:
- 2 480 mm
- Laadruumi kõrgus:
- 2 000 mm
- Laadimisruumi maht:
- 52 m³
Pakkumise üksikasjad
- kuulutuse ID:
- A20722547
- Värskendus:
- viimati kuupäeval 10.12.2025
Kirjeldus
TÜV new!
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Dwjdex Ep Nxjpfx Ag Eef
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Chassis
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Dwjdex Ep Nxjpfx Ag Eef
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2002
Saada päring
Telefon & Faks
+49 2182 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga




















