Temperatuuri juhtimisseade / jahuti

Single Temperiertechnik GmbH Chill Advanced C-25-L

*Technical specification:
-air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C.
-temperature range flow: +5°C to +30°C
(optionally lower temperatures down to -5°C possible)
-air flow rate: 8,000 m³/h
-max. air inlet temperature: +30°C
-Optionally with heating capacity up to 24kW

*Pumps:
-Delivery capacity up to 150 ltr/ min.
-Delivery pressure up to max. 4 or 7 bar
-Motor output 1.1 or 2.2 kW

*Dimensions:
-L/W/H: 1,450 mm x 750 mm x 1,680 mm
-empty weight: approx. 480 kg
-Circulation medium connection: DN 32 IG

*Details & Highlights:
-Internal refrigerant: R 123 a
Kedpfx Aog Ewwrokijdt
-Power supply: 380-425V/ 50Hz

-Regulation and control unit SBC-T
-Setpoint and actual value display, alarm display
-Fully hermetic reciprocating compressor
-Refrigerant receiver with safety valve according to DIN EN 378
-capacity control
-frost protection monitoring
-Flow monitoring
-grid cover over condenser
-oil sump heater
-drainage device
-Level monitoring by magnetic float switch
-installed dirt trap in the return line in the circulating medium
-overflow valve between flow and return as pump protection, fixed setting
-high and low pressure limiter according to DIN EN 378
-stainless steel tank, capacity: 80 litres, open system completely insulated
Self-supporting housing with castors, mobile
-system for indoor installation
-control box IP 54

Other performance classes are available on request. Visit our homepage for further details.

*This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.