MulcherMcConnel
Robocut T500
Mulcher
McConnel
Robocut T500
Tootmisaasta
2025
Seisund
Uus
Asukoht
Echt 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- Mulcher
- Tootja:
- McConnel
- Mudel:
- Robocut T500
- Tootmisaasta:
- 2025
- Seisund:
- uus
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
- Asukoht:
- Galvaniweg 10, 6101 XH Echt, Nederland

Helistada
Tehnilised andmed
- Maksimaalne kiirus:
- 7 km/h
- Värv:
- kollane
- Kogumass:
- 1 500 kg
- Varustus:
- pardaarvuti, valgustus
Pakkumise üksikasjad
- kuulutuse ID:
- A17711568
- Värskendus:
- viimati kuupäeval 06.01.2026
Kirjeldus
McCONNEL ROBOCUT T500
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
Cgedpfx Aeu Rurujb Hop
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
Cgedpfx Aeu Rurujb Hop
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Dokumendid
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2020
Saada päring
Telefon & Faks
+31 475 2... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Bilzen-Hoeselt
1 513 km
Ketiga ekskavaator
SanySY155U
SanySY155U
Väike kuulutus
Bergkamen
1 342 km
Miniekskavaator
CASECX 26 C mit Klima
CASECX 26 C mit Klima
Väike kuulutus
Siedlce
737 km
Treipink-freespink
CORMAKTokarko-frezarka TYTAN CENTER 750 VARIO
CORMAKTokarko-frezarka TYTAN CENTER 750 VARIO
Väike kuulutus
Peine
1 159 km
Miniekskavaator
KUBOTAMinibagger U 20 - 3 Minibagger Kurzheck
KUBOTAMinibagger U 20 - 3 Minibagger Kurzheck
Väike kuulutus
Sevenum
1 444 km
Miniekskavaator
Gunter GrossmannGG JAPAN 1000 Y
Gunter GrossmannGG JAPAN 1000 Y
Väike kuulutus
Menslage
1 255 km
Hansteel 5 HL pruulikoda (2017)
HansteelSudhaus
HansteelSudhaus
Väike kuulutus
Siedlce
737 km
Frees- ja puurmasin
CORMAKZX7045B1 + DRO
CORMAKZX7045B1 + DRO
Väike kuulutus
Berlin
993 km
Tuletõrjeauto HLF 20 / HTLF/TLF 4000 nelikvedu
MANTGM 18.320 4x4 HLF 20 TLF 4000 Feuerwehr
MANTGM 18.320 4x4 HLF 20 TLF 4000 Feuerwehr
Väike kuulutus
Krauchenwies
1 572 km
Käärtõstuki kandevõime 350 kg
Reinhold Beck Maschinenbau GmbHHS 350 Groß
Reinhold Beck Maschinenbau GmbHHS 350 Groß
Väike kuulutus
Rödermark
1 418 km
Samba puur
ALZMETALLAX 3 SV
ALZMETALLAX 3 SV
Teie kuulutus on edukalt kustutatud
Ilmnes viga

























































































