Spiraalse koonusratta lõikamismasin

Klingelnberg C 27

Model Klingelnberg C 27 – CNC Bevel Gear Milling Machine
Maximum workpiece diameter: 270 mm
Standard module: 1 – 4 mm (continuous) / 1 – 6 mm (single piece process)
Maximum tooth width: approx. 55 mm
Spiral angle: 0 – 60°
Number of teeth: 6 – 180
Maximum transmission ratio: 1 : 10
Minimum transmission ratio: 1 : 1
Cutter head radius: 39 – 105 mm (3" – 7.5")
Number of cutter groups (Oerlikon): 5 – 19
A-axis (cutter head spindle)
Mounting diameter, Gleason No. 14 – 1:24 Ø 58.34 mm
Adapter, Oerlikon short taper 1:4 Ø 130 mm
Spindle speed: 1000 rpm
B-axis (workpiece spindle)
Mounting diameter, Oerlikon external taper 1:4 Ø 140 mm
Internal taper No. 39 – 1:16 Ø 99.21 mm
Workpiece spindle bore: 90 mm
Workpiece spindle speed: 1000 rpm
C-axis
Swivel range: ± 90°
X-axis (milling depth axis)
Bwedpfx Afexur U Teaew
Travel: 350 mm
Maximum speed: 10 m/min
Y-axis (workpiece positioning axis)
Travel: 665 mm
Maximum speed: 10 m/min
Z-axis (tool positioning axis)
Travel: ± 120 mm
Maximum speed: 10 m/min
Machine equipment:
CNC control Siemens 840D or Fanuc 160iT3
Electrical equipment: Oerlikon standard 3 x 400 V 50 Hz, control 24 V DC
Work area lighting
Control cabinet cooler
Swiveling control panel
Hydraulic system
Impulse lubrication
Automatic workpiece clamping with adjustable drawbar
Clamping stroke monitoring
Foot switch for workpiece clamping
Standard tool kit
Electrical data:
Total connected load: 40 kVA
Voltage: 3 x 400 V ±10 %
Frequency: 50 Hz ±1 %
Protection: 80 A slow blow
Power interruption: max. 3 ms
Voltage dip: max. 20 % for 20 ms
Voltage peaks: max. 200 % of nominal voltage for 1.5 ms
Harmonic content: max. 10 %
Line symmetry: max. 2 % voltage difference between two phases
Control voltage: 24 V DC
Compressed air supply:
Pressure: min. 7 bar – max. 10 bar
Consumption: 100 l/min
Pressure dew point: max. 10 °C
Temperature range: 10 °C – 40 °C
Particle size: max. 40 µm
Axes of deburring and milling unit:
Q milling axis
V1 deburrer infeed axis
U deburrer positioning axis

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.