Töötamisplatvorm poolhaagis

KÖGEL Multi Chassis, verstärkt, Bordwände

You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website.

Excerpt of equipment. Full equipment details available upon request.

Chassis
* Standard ladder-type frame made from lightweight steel construction with inserted cross-members
* 8 mm thick coupling plate with a two-inch kingpin according to DIN 74080 / ISO 337

Running Gear
* Axle lift mechanism on axle 1
* Manufacturer of your choice Kögel – three-axle assembly with disc brakes, Ø 430 mm, inset approx. 120 mm
* Air suspension with approx. 180 mm travel

Vehicle Tyres
* 6 x 385/65 R 22.5 UNIROYAL TH 50 tyres

Chassis Attachments
* Landing legs (manufacturer of your choice from Kögel) mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right in the direction of travel
* Splash protection system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, consisting of 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mudflaps between the 1st and 2nd axle, and 1 pair of quarter-circle mudguards with mudflaps behind the axles
* Storage box for the safe keeping of: 10 side boards, folding stanchions, and rear partition or tailgate. Fully enclosed, splash water-protected, simultaneously serving as a lateral underrun protection
* Ground clearance (front) 220 mm
* 2 waterproof plastic toolboxes, dimensions (inside) approx. 545 x 400 x 400 mm. Installed at the rear, 1 left and 1 right
* High, fixed rear underrun protection made of steel in accordance with ECE-R58
* 1 pair each of extendable warning signs for overwidth loads, red / white retroreflective, with LED lighting, spiral cable, and plug connection. Arranged at the front and rear of the vehicle

Brake / Air Suspension System
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connecting pipes), parking brake as spring-loaded brake, external pneumatic connectors, and external EBS diagnostic connection via ISO 7638 plug
* WABCO EBS system
* Air suspension system incl. 1 lift and lower valve, mounted on the left behind the axle assembly. Driving position sets automatically
* 2 fail-safe coupling heads at the front ISO 1728 34410.010. Air tanks for the brake system and air supply made of steel (EN 286-2)

Floor
* Board floor approx. 30 mm thick
Csdpfx Aex Dgikohwsaa
* Floor circumferentially caulked
* Stake pockets for square tube stanchions approx. 80 x 80 mm, arrangement per drawing J9: 8 stake pocket strips (18 stake pockets per strip, of which 4 on the outside + 10 in the center per strip)

Body
* Compliant with body strength standard EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg

Front Wall
* Storage for max. 14 square tube stanchions approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall approx. 2,000 mm high with steel corner stanchions, profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at the front wall in accordance with EN 12640

Rear Wall
* Folding rear wall approx. 600 mm made from aluminium hollow profiles with 3 tie rods and T-bolt locks, 2 foldable steps on the inside
* Foldable steel end stanchions at board height at the rear

Side wall
* 4 pairs of folding stanchions at board wall height, 43540.380 VarioFix steel slotted outer frame
* 4 pairs of stanchion

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.