Saali ehitusGraeff
Leichtbauhalle
Saali ehitus
Graeff
Leichtbauhalle
VB lisandub käibemaks
20 000 €
Tootmisaasta
2000
Seisund
Kasutatud
(piiratud funktsionaalsus)
Asukoht
Frankenthal (Pfalz) 

Põhiandmed
- Masina nimetus:
- Saali ehitus
- Tootja:
- Graeff
- Mudel:
- Leichtbauhalle
- Tootmisaasta:
- 2000
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- piiratud funktsionaalsus
Hind ja asukoht
VB lisandub käibemaks
20 000 €
- Asukoht:
- Frankenthal, 67227 Frankenthal (Pfalz), Deutschland

Helistada
Tehnilised andmed
Mõõdud ja kaal
Kogupikkus:
91 000 mm
Kogulaius:
16 000 mm
Kogukõrgus:
4 500 mm
Pakkumise üksikasjad
- kuulutuse ID:
- A23327045
- Värskendus:
- viimati kuupäeval 18.11.2026
Kirjeldus
The halls are constructed from galvanized steel sheet. The vertical supports (Figure 2) are also made of double-layer galvanized sheet and are not concreted in. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall framework was placed and screwed. (20 mm nuts)
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
Iiodpe Ai Rmgsfx Abhsi
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
Iiodpe Ai Rmgsfx Abhsi
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Dokumendid
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2026
10 Kuulutused internetis
Saada päring
Telefon & Faks
+49 6122 ... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Frankenthal (Pfalz)
1 476 km
Saali ehitus
GraeffLeichtbauhalle
GraeffLeichtbauhalle
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Bielefeld
1 270 km
Lauapuurpink
WMW UNION HECKERTBFT 130/7 + TNC 145
WMW UNION HECKERTBFT 130/7 + TNC 145
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 134 km
Vertikaalne saag - vertikaalne
MÖSSNER-REKORDSM 320
MÖSSNER-REKORDSM 320
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Nanjing
7 271 km
Bystronici presspinkide tööriistad
CnstampBystronic P5 RFA Style H250mm Punch
CnstampBystronic P5 RFA Style H250mm Punch
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Debrecen
1 252 km
Väntvõlli lihvimismasin
SledumRG-270
SledumRG-270
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Nattheim
1 464 km
CNC-töötluskeskus
MorbidelliAuthor X5 44 Evo
MorbidelliAuthor X5 44 Evo
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Neuss
1 425 km
John Deere Gator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Bitburg
1 530 km
Lükandlaua saag
Martin - Sonderpreis -T 77 - sofort verfügbar -
Martin - Sonderpreis -T 77 - sofort verfügbar -
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Hessisch Lichtenau
1 274 km
CNC painutuspink 6-teljelise tagasiraua ja CYBELEC juhtimisega, stantsidele painutamise masin, painu
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Thurmaston
1 753 km
CNC treimis- ja freesimiskeskus
DOOSANPuma 2600SY
DOOSANPuma 2600SY
Teie kuulutus on edukalt kustutatud
Ilmnes viga

























































































