Hammasrataste lihvimismasinGleason-Hurth
ZHF 150
Masinate andmed
- Masina nimetus:
- Hammasrataste lihvimismasin
- Tootja:
- Gleason-Hurth
- Mudel:
- ZHF 150
- Masina number:
- G0504
- Valmistamise aasta:
- 2005
- Riik:
- kasutusvalmis (kasutatud)
- Funktsionaalsus:
- täielikult toimiv
Tehnilised üksikasjad
- Tooriku läbimõõt (max.):
- 63 mm
- Teekonna pikkus Z-telg:
- 105 mm
- Välisläbimõõt:
- 275 mm
- Keskpunktide vaheline kaugus:
- 350 mm
- Pöördenurk A-telg (min.):
- −30 °
- Pöördenurk A-telg (max.):
- 30 °
Provision
- Asukoht:
- Hessen, Saksamaa
– Kaugus: umbes 1 390 km
- Kättesaadavus:
- kohe pärast oksjoni lõppu
- Tarnetingimused:
- FCA
1 000,00 € (siduv)
tasuta
Kirjeldus
TECHNICAL DETAILS
Workpiece diameter: 63.5 mm
Center distance: 350 mm
Length of the clamping surface: 1,550 mm
Number of T-slots: 2
Width of T-slots: 18 mm
Distance between T-slots: 180 mm
Center height (tailstocks): 350 mm
Swivel range of the fine wheel head (U-axis): +30 / -30 °
Center distance tailstock/fine wheel: min. 120 mm / max. 225 mm
Input resolution (all NC axes): 0.001 mm / degree
Control: SIEMENS 840D
Feed carriage
Movement range (Z-axis travel): 105 mm
Input resolution: 0.001 mm
Tool
Outer diameter: 225 - 275 mm
Bore diameter: 160 mm
Width: 60 mm
Workpiece details
Outer diameter: 40 - 150 mm
Module: 1.25 - 4.0 mm
Max. tooth width: 45 mm
Speeds and feeds
Tool speed: max. 2,000 rpm
Feed rate Z-direction: up to 2 m/min
Feed speed X-direction: up to 2 m/min
Feed speed U-direction: up to 2 m/min
Feed speed V-direction: up to 2 m/min
C3 direction: max. 12 °/s
Servo drives
Tool drive C1: 27.0 Nm at 3,000 rpm
Workpiece drive C2: 27.0 Nm at 3,000 rpm
X-axis: 20.0 Nm at 3,000 rpm
Z-axis: 20.0 Nm at 3,000 rpm
U-axis: 6.0 Nm at 3,000 rpm
Portal vertical (V1 axis): 6.0 Nm at 3,000 rpm
Gripper rotation axis C3: 5.0 Nm at 3,000 rpm
Loading slide (X1 axis): 5.0 Nm at 3,000 rpm
Three-phase motors
Hydraulic motor: 1.5 kW at 1,410 rpm
Central lubrication: 0.07 kW at 2,700 rpm
Coolant pump: 4 kW at 2,840 rpm
Hydraulic equipment
Flow rate: 21 l/min
System pressure: 50 bar
Clamping pressure headstock: max. 35 bar
Clamping pressure tailstock: min. 20 bar / max. 35 bar
MACHINE DETAILS
Weight: 5,500 kg
Space requirement: 2,700 x 2,300 x 2,600 mm
Operating resources
Hydraulic fluid: HLP D 46
Hydraulic capacity: 100 l
Electrics
Operating voltage: 400 V
Control voltage: 24 V DC
Light voltage: 230 V AC
Frequency: 50 Hz
Power requirement: approx. 27 kVA
EQUIPMENT
- Central lubrication
- Coolant pump
- Capacitive distance system
- Automatic workpiece clamping
- Fine gear head with U-axis
- Machine with full hydraulic equipment
- Dialogue-guided operating terminal
Reklaam tõlgiti automaatselt. Võimalikud on tõlkevigad.
Makse töötlemine
- Juhuslikud ostukulud:
- 18 %
- Maksetingimused:
- 100 % ettemaks
- Makseviisid:
Pangaülekanne
Pakkumise üksikasjad
- Kuulutuse ID:
- A19203401
- Viitenumber:
- AUC-2505085
- Ajakohastamine:
- viimati 22.05.2025
- Eksklusiivne pakkumine:
- saadaval ainult oksjonil
Külasta
Saksamaa GLEASON-HURTHZHF 150
Niedersachsen, Deutschland HURTH - GLEASONZSE 150 CNC
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker- Usalduse pitser
Mis on usaldusmärk?
Machineseeker sertifitseerib valitud jaemüüjaid Machineseeker usaldusmärgiga. Enne väljastamist viivad kogenud Machineseeker töötajad läbi standardiseeritud ja põhjaliku kontrolli.
Mida me kontrollime?
kauplemisloa või äriregistri väljavõtte kontrollimine
Ettevõtja postiaadressi
kontrollimine
pangakonto valideerimine
Põhitelefoninumbri
telefoni
saadavuse kontrollimine
Üritusteave
ei tohi avaldada mingeid negatiivseid omadusi
Kaebused
võivad viia pitseri tagasivõtmiseni.Mida see tähendab teie kui ostja jaoks?
Machineseeker usaldusmärgis võimaldab teil ostjana ära tunda usaldusväärseid kauplejaid, kes tõenäoliselt teevad ausat ja õiglast äri, ilma et peaksite ise kontrollima.
Loomulikult võivad ostuprotsessi käigus siiski tekkida erimeelsused. Machineseeker ei vastuta õigusrikkumiste eest, mille on toime pannud ostjad või müüjad, kes tegutsevad veebilehel Machineseeker.