Töötamisplatvorm poolhaagis

FAYMONVILLE MAX410 Ballastauflieger

More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request.

Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN).

Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load).

Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data.

Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner.

Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit.

Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098.

Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa).

Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax.

Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las
Rsdpfxezhd Nie Amgsw

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.