Värvirobotid, maalrid, tööstusrobotidFANUC
P-250iA/15
Värvirobotid, maalrid, tööstusrobotid
FANUC
P-250iA/15
Tootmisaasta
2007
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Krostitz 

Põhiandmed
- Masina nimetus:
- Värvirobotid, maalrid, tööstusrobotid
- Tootja:
- FANUC
- Mudel:
- P-250iA/15
- Masina number:
- 82351
- Tootmisaasta:
- 2007
- Seisund:
- nagu uus (kasutatud)
- Töövõimekus:
- täielikult töökorras
- Tööajad:
- 92 h
Hind ja asukoht
- Asukoht:
- Hilchenbacher Str. 1, 04509 Krostitz, Deutschland

Helistada
Tehnilised andmed
Mõõdud ja kaal
Kogumass:
520 kg
Võimsuse andmed
Sisendpinge:
400 V
Sisendvool:
20 A
Sisendtüüpi vool:
Konditsioneer
Lisateave
Kontrolleri tootja:
FANUC
Kontrolleri mudel:
RJ3iC
Kandevõime:
15 kg
Tõukeulatus:
2 800 mm
Juhtimiskapi kõrgus:
1 360 mm
Juhtkapi laius:
800 mm
Pöördumisvahemik:
320 °
Kordustäpsus:
2 mm
Õppepulti tootja:
FANUC
Pakkumise üksikasjad
- kuulutuse ID:
- A16279249
- Värskendus:
- viimati kuupäeval 12.12.2025
Kirjeldus
This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem.
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
Iodpotu H Avjfx Apastp
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special.
We give a 1-year commissioning guarantee.
We can help with transportation and installation.
It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation.
Iodpotu H Avjfx Apastp
At the moment it is configured as right-armed and right-handed.
However, this can easily be changed without mechanical conversion.
The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest.
We would bring the device to us from Frankfurt.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2020
9 Kuulutused internetis
Saada päring
Telefon & Faks
+49 34295... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Krostitz
1 124 km
Ranne Fanuc Robot P-250iA 15
FANUCP-250iA/15
FANUCP-250iA/15
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Juszczyn
1 047 km
Lauafreespink
SCMT130E
SCMT130E
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Krostitz
1 124 km
Värvirobotid, maalrid, tööstusrobotid
FANUCP-250iA/15
FANUCP-250iA/15
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Krostitz
1 124 km
Värvirobotid, tööstusrobotid
FANUCP-250iA/15
FANUCP-250iA/15
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Cantù
1 787 km
Hüdrauliline vedeliku membraanipress
ITALPRESSEFORMATIC 20.9
ITALPRESSEFORMATIC 20.9
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Zamość
885 km
Lõikamis- ja töötlemiskeskus DG 244 + E580/1
ElumatecDG 244 + E580/1 ROK 2019
ElumatecDG 244 + E580/1 ROK 2019
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 134 km
Töötlemiskeskus - vertikaalne
HURCOVMX 42
HURCOVMX 42
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Kežmarok
1 095 km
Nurgakujuline aknatöötluskeskus
WeinigUnicontrol 10
WeinigUnicontrol 10
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Jonava
393 km
21-29-543 harja lihvimine masin
WOODLAND MACHINERYSK-1000-P6
WOODLAND MACHINERYSK-1000-P6
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Ciriè
1 897 km
Pikkusesse lõikamise ja lõikamisliin
STAMSTAM-2000
STAMSTAM-2000
Teie kuulutus on edukalt kustutatud
Ilmnes viga






























































































































