Raske riiul4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
Raske riiul
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB lisandub käibemaks
1 490 €
Tootmisaasta
2024
Seisund
näitusmasin
Asukoht
Bad Feilnbach 

Pildid näitavad
Kuva kaart
Andmed masina kohta
Hind ja asukoht
VB lisandub käibemaks
1 490 €
- Asukoht:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A5776089
- Värskendus:
- viimati kuupäeval 28.01.2025
Kirjeldus
Cantilever rack in painted version (RAL 7016 anthracite):
Kfodpfxsguk A Hs Abkja
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Kfodpfxsguk A Hs Abkja
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2019
Saada päring
Telefon & Faks
+49 8064 ... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Dettingen an der Iller
1 523 km
Töödeldav keskus
HermleC 800 V
HermleC 800 V
Väike kuulutus
Egenhofen
1 467 km
Harjutusmasin, struktureerimismasin
- ItalyMaster 400.2 ALU
- ItalyMaster 400.2 ALU
Väike kuulutus
Borken
1 368 km
Vaakumpump, pöörleva vane vaakumpump Rootspumpe
LeyboldRuvac WSU 2001
LeyboldRuvac WSU 2001
Väike kuulutus
Sachsenheim
1 494 km
Hüdrauliline kaablivints raadio 1700 kg tõmbejõuga
HOLZHÄUER Maschinenbau GmbHHAW1700-EV-Funk
HOLZHÄUER Maschinenbau GmbHHAW1700-EV-Funk
Väike kuulutus
Bad Feilnbach
1 477 km
Kandiline hammasratas
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
Väike kuulutus
Wtelno
741 km
Süsinikterasest mahutid 73m3
Horizontal, 73 000l, 50 units available!Technical drawing available here
Horizontal, 73 000l, 50 units available!Technical drawing available here
Väike kuulutus
Rīga
197 km
Automaatne kapsasüdamik KU-2400
Alistar EuropeKU-2400
Alistar EuropeKU-2400
Väike kuulutus
Stary Dwór
735 km
Sibula koorimismasin
ProdMaCB-80
ProdMaCB-80
Väike kuulutus
Peskojai
386 km
Rihmapressi
ProFruit MachineryPOWERPRESS 3000
ProFruit MachineryPOWERPRESS 3000
Väike kuulutus
Sierakowska Huta
646 km
Puiduhakkur Hakkur
KOHLBACH THW-30/30
KOHLBACH THW-30/30
Teie kuulutus on edukalt kustutatud
Ilmnes viga













































































