Zeiss Contura Vast XT Gold koordinaatmõõtemasin (CMM)Zeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold koordinaatmõõtemasin (CMM)
Zeiss
CONTURA 9/18/8
EXW Fikseeritud hind lisandub käibemaks
110 000 €
Tootmisaasta
2020
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Budapest 

Põhiandmed
- Masina nimetus:
- Zeiss Contura Vast XT Gold koordinaatmõõtemasin (CMM)
- Tootja:
- Zeiss
- Mudel:
- CONTURA 9/18/8
- Tootmisaasta:
- 2020
- Seisund:
- väga hea (kasutatud)
- Töövõimekus:
- täielikult töökorras
- Tööajad:
- 12 500 h
Hind ja asukoht
EXW Fikseeritud hind lisandub käibemaks
110 000 €
- Asukoht:
- Budapest, Ungari

Helistada
Tehnilised andmed
Võimsuse andmed
Sisendpinge:
230 V
Dokumentatsioon ja sertifikaat
Viimase kapitaalremondi aasta:
2025
Dokumentatsioon / käsiraamat
Telgede spetsifikatsioonid
X-telje liikumisteekond:
900 mm
Y-telje liikumisteekond:
1 800 mm
Z-telje liikumisteekond:
800 mm
Pakkumise üksikasjad
- kuulutuse ID:
- A22566042
- Värskendus:
- viimati kuupäeval 17.08.2026
Kirjeldus
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
Fedpezuzf Iefx Ackepn
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
Fedpezuzf Iefx Ackepn
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
If you have any questions or need further information, please send us a message or call us.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2023
1 Kuulutus onlines
Saada päring
Telefon & Faks
+36 20 41... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Baarle-Nassau
1 499 km
Laotõstuk
KardexShuttle XP500
KardexShuttle XP500
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Mögglingen
1 466 km
Vertikaalne töötlemiskeskus
HURCOVMX 42 i
HURCOVMX 42 i
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Sonsbeck
1 412 km
Tõmbekatse masin-Universalp vastavalt DIN 7500-le
Hegewald & PeschkeH5TMNI
Hegewald & PeschkeH5TMNI
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Halberstadt
1 155 km
CNC treimis- ja freesimiskeskus - 5-teljeline
DMGDMC 210 FD
DMGDMC 210 FD
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Contamine-sur-Arve
1 868 km
Vertikaalne töötlemiskeskus
HURCOVMX60 SRTI
HURCOVMX60 SRTI
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Sonnenbühl
1 541 km
Tööriista mõõtemasin
ZollerTitan
ZollerTitan
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 513 km
Hurco VMX 42i
HurcoVMX 42i
HurcoVMX 42i
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Contamine-sur-Arve
1 868 km
Vertikaalne töötlemiskeskus
HURCOVMX30 UHSI
HURCOVMX30 UHSI
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Olching
1 462 km
Silindriline lihvimismasin
EMAGWPG 7
EMAGWPG 7
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Contamine-sur-Arve
1 868 km
Cnc multispindel automaatne treipingi
INDEXMS32C
INDEXMS32C
Teie kuulutus on edukalt kustutatud
Ilmnes viga













































































