Keskmine treipingiWeiler
Commodor Geometrisch Überholt
Keskmine treipingi
Weiler
Commodor Geometrisch Überholt
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Ubstadt-Weiher 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- Keskmine treipingi
- Tootja:
- Weiler
- Seisund:
- nagu uus (kasutatud)
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
- Asukoht:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A18287011
- Värskendus:
- viimati kuupäeval 17.01.2025
Kirjeldus
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Dsdpfx Alevrcqds Rscg
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Dsdpfx Alevrcqds Rscg
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Saada päring
Telefon & Faks
+49 7251 ... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Ubstadt-Weiher
1 493 km
Universaalpink
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
Väike kuulutus
Gondelsheim
1 502 km
Tõstetee kraana, saalikraana, rööpmelaius 14 260 mm
ABUS Hallenkran Brückenkran Kran ELV 5tELK 5000Kg 5t Funk Portalkran Kran
ABUS Hallenkran Brückenkran Kran ELV 5tELK 5000Kg 5t Funk Portalkran Kran
Väike kuulutus
Ubstadt-Weiher
1 493 km
Keskmine treipingi
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
Väike kuulutus
Legden
1 426 km
Õue traktor
John Deere3520 4x4 Hofschlepper Rasenbereifung
John Deere3520 4x4 Hofschlepper Rasenbereifung
Väike kuulutus
Saksamaa
1 134 km
Püstine puurmasin
HUVEMAMG40M
HUVEMAMG40M
Väike kuulutus
Wiefelstede
1 205 km
Treipingi 420 x 1340 mm
WeisserPF200
WeisserPF200
Väike kuulutus
Son
1 466 km
Laagrid
SKF, FAG & Timken etc.
SKF, FAG & Timken etc.
Väike kuulutus
Aalen
1 453 km
Ristlõike- ja kaldketassaag
GrauleZS 200 N
GrauleZS 200 N
Väike kuulutus
Witten
1 373 km
Keskne treipink ja spindlitreipink
COLCHESTERMASTIFF VS 1800
COLCHESTERMASTIFF VS 1800
Väike kuulutus
Rödermark
1 418 km
Suur kiirus Käigukasti kolonni puurimismasin
IBARMIAAX 32
IBARMIAAX 32
Teie kuulutus on edukalt kustutatud
Ilmnes viga
























































































































































