CNC-treipinkTRAUB
TNC 42/65 DGY
Andmed masina kohta
- Masina nimetus:
- CNC-treipink
- Tootja:
- TRAUB
- Mudel:
- TNC 42/65 DGY
- Tootmisaasta:
- 1996
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- täielikult töökorras
- Tööajad:
- 46 282 h
Tehnilised andmed
- Kontrolleri mudel:
- TX 8F
- Maksimaalne vastspindli pöörlemiskiirus:
- 4 000 p/min
- Töödeldava detaili läbimõõt (max):
- 56 mm
- Varustus:
- laastukonveier, varrasöötur
ettevõtmine
- Asukoht:
- Baden-Württemberg, Saksamaa
– Kaugus: ca 1 502 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- FCA
700,00 € (siduv)
tasuta
Kirjeldus
No reserve price – guaranteed sale to the highest bidder!
By placing a bid, you are obliged to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026!
TECHNICAL DETAILS
Counter-spindle max. speed: 4,000 rpm
Max. workpiece diameter: 56 mm
Rapid traverse: max. 15 m/min
Fine interpolation cycle: 0.34 ms
Maximum thread pitch: 999,999 mm
Maximum radius: 99,999.999 mm
Feed override: 0–200%
Rapid traverse override: 0–100%
Spindle speed override: 50–120%
Workpiece removal via counter-spindle
Programming: EIA and ISO code
Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001°
C-axis
Main spindle:
Max. speed: 80 rpm
Torque at 100% duty cycle: 100 Nm
Accuracy: +/- 3 minutes
Counter-spindle:
Max. speed: 80 rpm
Torque at 100% duty cycle: 30 Nm
Accuracy: +/- 3 minutes
Tool turret 1 & 2
Driven tools per turret: 10 (14)
Max. speed: 4,000 (8,000)
Power at 100% duty cycle: 1.5 kW
Power at 15% duty cycle: 4 kW
Torque at 15% duty cycle: 12.4 (4) Nm
Tool holder/tool station count: 10 (14)
Cylindrical shank acc. to DIN 69880: Ø 30 x 55 (25 x 48) mm
Tool cross-section: 20 x 20 (16 x 16) mm
Chip-to-chip time (acc. to VDI 2852): 1.2 s
Indexing time per station: 0.6 s
Over 5 stations: 1.5 s
Counter-spindle (CNC controlled in Z direction)
Max. speed: 4,000 rpm
Max. clamping diameter: 65 mm
Continuously programmable three-phase motor: 11 kW
Torque: 210 Nm
Feed force at 100% duty cycle: 6,000 N
Feed stroke: 520 mm
Ball screw drive: Ø 32 x 10 mm
MACHINE DETAILS
Control: TX 8F
Operating voltage: 400 V
Frequency: 50 Hz
Control voltage: 230 V
Rated current: 85 A
Connection: 54 kW
Connected load: 39 kW
Noise emission at operator’s position: 71 dB(A)
Hydraulics
System pressure: 60 bar
Tank capacity: 150 l
Coolant system
Per tool turret: Single-stage centrifugal pump
Pump pressure: 5/12 bar
Tank volume without chip conveyor: 300 l
Tank volume with chip conveyor: 280 l
Dimensions & weight
Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm
Weight: 6,000 kg
Displayed operating hours: 46,282 h
EQUIPMENT
STAMAG bar loader
Chip conveyor
Hainbuch chuck sy
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Makseviisid:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A21322522
- Viitenumber:
- AUC-2602294
- Värskendus:
- viimati kuupäeval 25.02.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Saksamaa TraubTNC 42/65 DGY
Saksamaa TraubTNC 42/65 DGY
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-usaldusmärk
Mis on usaldusmärk?
Machineseeker sertifitseerib valitud edasimüüjad Machineseeker usaldusmärgisega. Enne väljastamist teostavad kogenud Machineseeker töötajad standardiseeritud ning põhjaliku kontrolli.
Mida me kontrollime?
Äritegevusloa või äriregistri väljavõtte kontrollimine
Müüja
postiaadressi kontrollimine
Pangakonto andmete valideerimine
Põhinumbri
telefonilise
kättesaadavuse kontrollimine
Majandusinfo
ei tohi sisaldada negatiivseid tunnuseid
Ostjate kaebused
võivad tähendada sertifikaadi äravõtmistMida see teie kui ostja jaoks tähendab?
Tänu Machineseeker usaldusmärgisele saate ostjana ilma enda kontrollita ära tunda usaldusväärseid kaupmehi, kes tõenäoliselt teevad ausat ja seaduskuulekat äri.
Loomulikult võivad ostuprotsessi käigus siiski tekkida erimeelsused. Machineseeker ei vastuta seaduserikkumiste eest, mille panevad toime Machineseeker platvormil aktiivsed ostjad või müüjad.