SÜSTEEM DIGITAALSEKS RAAMATUTOOTMISEKSTECNAU
LIBRA 800
SÜSTEEM DIGITAALSEKS RAAMATUTOOTMISEKS
TECNAU
LIBRA 800
Tootmisaasta
2017
Seisund
Kasutatud
Asukoht
Europa 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- SÜSTEEM DIGITAALSEKS RAAMATUTOOTMISEKS
- Tootja:
- TECNAU
- Mudel:
- LIBRA 800
- Tootmisaasta:
- 2017
- Seisund:
- väga hea (kasutatud)
Hind ja asukoht
- Asukoht:
- Europa

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A21287107
- Viitenumber:
- 40001.26
- Värskendus:
- viimati kuupäeval 26.02.2026
Kirjeldus
HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6.Cooling towers can be reordered as needed by the customer.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Nsdpjylyhdofx Abdjku
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6.Cooling towers can be reordered as needed by the customer.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Nsdpjylyhdofx Abdjku
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2006
Saada päring
Telefon & Faks
+41 71 54... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Leinfelden-Echterdingen
1 513 km
FGT Graphic Machinery - Töötlemine
GMFB 3300 - Hotfoil/Screen etc.
GMFB 3300 - Hotfoil/Screen etc.
Väike kuulutus
Langenfeld (Rheinland)
1 417 km
Digitaalne trükimasin
XeroxiGen 5 Press incl. 5th colour
XeroxiGen 5 Press incl. 5th colour
Väike kuulutus
Volkach
1 362 km
Horizon HT-30 | 2005 | 1,65 mln
HorizonHT-30
HorizonHT-30
Väike kuulutus
Borken
1 367 km
Klaaside kiletamine rida koos 2 küttekehad
Tool-TempHVD-G02
Tool-TempHVD-G02
Väike kuulutus
Leinfelden-Echterdingen
1 513 km
FGT Graphic Machinery - Töötlemine
GMDC 330 - Age: 2016!
GMDC 330 - Age: 2016!
Väike kuulutus
Saksamaa
1 242 km
Lamineerimissüsteem
AutobondMini 105 THS
AutobondMini 105 THS
Väike kuulutus
Dettelbach
1 368 km
Kilekahanemismasin (nurga-keevitaja + tunnel)
SmipackWS 560 A + T 450
SmipackWS 560 A + T 450
Väike kuulutus
파주시
7 123 km
Perfektne köitja
HorizonBQ-270
HorizonBQ-270
Väike kuulutus
Leinfelden-Echterdingen
1 513 km
FGT graafilised masinad - Labelpress
MPSEF 410
MPSEF 410
Väike kuulutus
Wakefield
1 720 km
Liimköiteseade
HorizonBQ-270 EVA
HorizonBQ-270 EVA
Teie kuulutus on edukalt kustutatud
Ilmnes viga









































































