Puhumisvormimise masinTECHNE
4000TWIN
Puhumisvormimise masin
TECHNE
4000TWIN
tootmisaasta
1999
Seisund
Kasutatud
Asukoht
Fumane (Verona) 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- Puhumisvormimise masin
- tootja:
- TECHNE
- Mudel:
- 4000TWIN
- tootmisaasta:
- 1999
- Seisund:
- kasutatud
Hind ja asukoht
- Müüja asukoht:
- Via Incisa 1, 37022 Fumane (Verona), Itaalia
Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A18007426
- Viitenumber:
- SO116
- värskendus:
- viimati kuupäeval 16.12.2024
Kirjeldus
Used TECHNE 4000TWIN HDPE Blow Molding Machine up to 1805 bph
Technical Parameters and Features of the HDPE Blow Molding Machine TECHNE
The HDPE Blow Molding Machine TECHNE is equipped with a double station and eight cavities (4+4) and a center distance of 102.5 mm. The used TECHNE 4000TWIN blow molding machine specifically processes HDPE (High-Density Polyethylene) in a single-layer configuration. Furthermore, the machine efficiently produces up to 1805 bph (bottles per hour). Demonstrating a 94% efficiency rate as verified by the FAT parameter.
Production and Efficiency
This HDPE Blow Molding Machine TECHNE cycles through production in approximately 15 seconds. It is subject to a +/- 1% variation. Moreover, it consistently produces around 43,320 bpd (bottles per day). Allowing for a +/- 5% fluctuation. Additionally, a 59 kW DC motor powers its extruder, which has an 80 mm/25D diameter and supports an HDPE output of roughly 160 kg/h.
Ijdpjvgvpcofx Aaaetn
Additional Technical Details
The Used HDPE Blow Molding Machine TECHNE 4000TWIN up to 1805 bph requires a total power installation of 157 kWh and consumes an average of 63 kWh. Consequently, a hydraulic system exerts a clamping force of 135 kN on the mold, controlling the blow pins, clamping, and carriage movements through proportional valves. In addition, levers and a strategically positioned hydraulic actuator facilitate mold closing. Optimizing the diffusion of clamping force across the mold-holder plates.
Control and Automation of the HDPE Blow Molding Machine TECHNE
Operators can regulate and monitor machine of the HDPE Blow Molding Machine TECHNE operations through a Microset Moog control panel, ensuring precision and ease of setup. Similarly, the parison cutting system employs linear cold blades. Meanwhile, a pneumatic pick and place system automatically removes bottles. Also, a single cylinder controls the parison thickness in a closed loop, offering weight control and independent profile adjustments for each head via screen monitoring. Importantly, a single pneumatic actuator performs both upper and lower deflashing.
Power Supply and Year of Manufacture
Built in 1999, the machine operates on a 400 Volt, 50 Hz, three-phase power supply, facilitating smooth integration with existing industrial setups. Therefore, the TECHNE 4000TWIN stands out as a durable and effective choice for professionals in the bottling industry seeking a high-performance solution for processing HDPE containers. Ultimately, this machine represents a reliable and cost-effective investment in manufacturing efficiency.
Optional Accessories:
Grinders for scraps TRIA mod. BM 5030 S
Linear conveyors for scraps
Angled conveyors for scraps
MOTAN complete feeding system for machine mod. 4000TWIN
Leak testers for machine 4000TWIN
Conveyors group and parts for bottles receiving and moving
Chiller Industrial Frigo mod. GR1AC160
Air compressor Atlas Copco mod. GA 75 VSD+ FF 8153 3258 35
Technical Parameters and Features of the HDPE Blow Molding Machine TECHNE
The HDPE Blow Molding Machine TECHNE is equipped with a double station and eight cavities (4+4) and a center distance of 102.5 mm. The used TECHNE 4000TWIN blow molding machine specifically processes HDPE (High-Density Polyethylene) in a single-layer configuration. Furthermore, the machine efficiently produces up to 1805 bph (bottles per hour). Demonstrating a 94% efficiency rate as verified by the FAT parameter.
Production and Efficiency
This HDPE Blow Molding Machine TECHNE cycles through production in approximately 15 seconds. It is subject to a +/- 1% variation. Moreover, it consistently produces around 43,320 bpd (bottles per day). Allowing for a +/- 5% fluctuation. Additionally, a 59 kW DC motor powers its extruder, which has an 80 mm/25D diameter and supports an HDPE output of roughly 160 kg/h.
Ijdpjvgvpcofx Aaaetn
Additional Technical Details
The Used HDPE Blow Molding Machine TECHNE 4000TWIN up to 1805 bph requires a total power installation of 157 kWh and consumes an average of 63 kWh. Consequently, a hydraulic system exerts a clamping force of 135 kN on the mold, controlling the blow pins, clamping, and carriage movements through proportional valves. In addition, levers and a strategically positioned hydraulic actuator facilitate mold closing. Optimizing the diffusion of clamping force across the mold-holder plates.
Control and Automation of the HDPE Blow Molding Machine TECHNE
Operators can regulate and monitor machine of the HDPE Blow Molding Machine TECHNE operations through a Microset Moog control panel, ensuring precision and ease of setup. Similarly, the parison cutting system employs linear cold blades. Meanwhile, a pneumatic pick and place system automatically removes bottles. Also, a single cylinder controls the parison thickness in a closed loop, offering weight control and independent profile adjustments for each head via screen monitoring. Importantly, a single pneumatic actuator performs both upper and lower deflashing.
Power Supply and Year of Manufacture
Built in 1999, the machine operates on a 400 Volt, 50 Hz, three-phase power supply, facilitating smooth integration with existing industrial setups. Therefore, the TECHNE 4000TWIN stands out as a durable and effective choice for professionals in the bottling industry seeking a high-performance solution for processing HDPE containers. Ultimately, this machine represents a reliable and cost-effective investment in manufacturing efficiency.
Optional Accessories:
Grinders for scraps TRIA mod. BM 5030 S
Linear conveyors for scraps
Angled conveyors for scraps
MOTAN complete feeding system for machine mod. 4000TWIN
Leak testers for machine 4000TWIN
Conveyors group and parts for bottles receiving and moving
Chiller Industrial Frigo mod. GR1AC160
Air compressor Atlas Copco mod. GA 75 VSD+ FF 8153 3258 35
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2021
Saada päring
Telefon & Faks
+39 344 0... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga