Profiillaser: Senfeng SF T seeria

Senfeng SF T series

The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles.
The machine frame can be equipped with a wide range of jaw plates and machine bed lengths.
The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head.

With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics.
Besten Machines has been a dealer for metalworking machines for more than 25 years.
We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees.
In addition, we have a large stock of spare parts to be able to offer a high level of service.

Technical data:
- Laser Power: Up to 6,000 watts
- Laser Wave length: 1020 nm – 1080 nm
- Maximum tube length: up to 15200 mm
- Maximum profile weight: depending on the jaw plates and length of the machine bed
- Tube cutting capacity: Ø 8-350 mm
- Tube cutting capacity: 8x8 - 350x350 mm
- Chuck rotation speed: Depending on the jaw plates
- Axes speed: Depending on the jaw plates
- Operating voltage: 400V / 50Hz ± 5%
- Tailing (residual material): 70 mm
- Cutting gases: Oxygen, Compressed air, Nitrogen

=====

In addition, the machine is equipped with the following options:
- Control: TubePRO
- Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately
- Valve for collecting small pieces. This is opened and closed in the control with an air cylinder
- Pneumatic jaw plates, for fast and precise clamping
- Various automations possible
- Aviation aluminum beam
- Laser source: Max Photonics or IPG
Kodpfjvvh Ngjx Af Tedu
- Cutting head: Depending on power
- Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure)
- Water cooler
- Power stabilizer
- Automatic lubrication unit

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.