Parketi tootmisliinSelect_Unigripper_Meler_CSP
2 laags parket lijminstallatie
Parketi tootmisliin
Select_Unigripper_Meler_CSP
2 laags parket lijminstallatie
Fikseeritud hind lisandub käibemaks
22 500 €
Tootmisaasta
2016
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Heeswijk Dinther 

Põhiandmed
- Masina nimetus:
- Parketi tootmisliin
- Tootja:
- Select_Unigripper_Meler_CSP
- Masina number:
- 1
- Tootmisaasta:
- 2016
- Seisund:
- kasutatud
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
Fikseeritud hind lisandub käibemaks
22 500 €
- Asukoht:
- Heeswijk Dinther, Holland

Helistada
Tehnilised andmed
Võimsuse andmed
Sisendtüüpi vool:
kolmefaasiline
Pakkumise üksikasjad
- kuulutuse ID:
- A22945826
- Värskendus:
- viimati kuupäeval 11.10.2026
Kirjeldus
Machine components:
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
Ledpez Rkbcsfx Adcjhn
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
Ledpez Rkbcsfx Adcjhn
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2025
3 Kuulutused internetis
Saada päring
Telefon & Faks
+31 6 510... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Wioska
902 km
Lai lintlihvpink
SCM DMCDMC SY TM 1650
SCM DMCDMC SY TM 1650
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Lublin
830 km
Lai lintlihvpink
costaS6 CTT 1350
costaS6 CTT 1350
Teie kuulutus on edukalt kustutatud
Ilmnes viga



























































