Töödeldav keskusRöders
RP 800
Töödeldav keskus
Röders
RP 800
VB lisandub käibemaks
20 500 €
Tootmisaasta
2001
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Gütersloh 

Põhiandmed
- Masina nimetus:
- Töödeldav keskus
- Tootja:
- Röders
- Mudel:
- RP 800
- Tootmisaasta:
- 2001
- Seisund:
- hea (kasutatud)
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
VB lisandub käibemaks
20 500 €
- Asukoht:
- Dietrichstr. 103, 33335 Gütersloh, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A18292586
- Värskendus:
- viimati kuupäeval 09.09.2025
Kirjeldus
Portal machining center for HSC milling
The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system.
Technical data
- Travel ranges: X 800 mm, Y 600 mm, Z 400 mm
- Drive power: 17 kW
- Speed: 36,000 rpm - Fischer motor spindle
- Spindle mount: HSK E50
- Feed rate: up to 60 m/min.
Work table
- Dimensions 900 mm x 700 mm
- Max. workpiece weight 800 kg
Control
- Röders HSC RMS6, including software for:
milling simulation and for cutting out machining
- Electronic hand control panel and mouse
- Ethernet interface integrated in Windows NT
- Remote maintenance of the RSM 6 machine control
Machine structure
- Portal version with temperature stabilization of the machine frame
Tool changer
- 30 stations with collision monitoring
Equipment
- Cooling unit for milling spindle
- Infrared measuring probe for automatic:
tool length correction, diameter measurement and tool breakage monitoring
- Microjet spray cooling and lubricator
- Fixed bearings and spindle nuts water-cooled
- Fully protected cabin (crane loading possible)
- Connection for the work area extraction
- 2 pcs. Screw chip conveyor
- Workpiece cleaning via separate air nozzles
Machine data
- Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm
- Weight approx. 13,000 kg
- Connected load 400V, 50/60 Hz, 3 phases
Hedpovri Nmofx Afxsfp
The machining center is in good condition. Maintenance and repair work was carried out regularly.
A viewing with power and chips is possible by appointment.
All tools and operating materials shown in the photos are not included in the scope of delivery of the machine.
Technical changes and errors reserved.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system.
Technical data
- Travel ranges: X 800 mm, Y 600 mm, Z 400 mm
- Drive power: 17 kW
- Speed: 36,000 rpm - Fischer motor spindle
- Spindle mount: HSK E50
- Feed rate: up to 60 m/min.
Work table
- Dimensions 900 mm x 700 mm
- Max. workpiece weight 800 kg
Control
- Röders HSC RMS6, including software for:
milling simulation and for cutting out machining
- Electronic hand control panel and mouse
- Ethernet interface integrated in Windows NT
- Remote maintenance of the RSM 6 machine control
Machine structure
- Portal version with temperature stabilization of the machine frame
Tool changer
- 30 stations with collision monitoring
Equipment
- Cooling unit for milling spindle
- Infrared measuring probe for automatic:
tool length correction, diameter measurement and tool breakage monitoring
- Microjet spray cooling and lubricator
- Fixed bearings and spindle nuts water-cooled
- Fully protected cabin (crane loading possible)
- Connection for the work area extraction
- 2 pcs. Screw chip conveyor
- Workpiece cleaning via separate air nozzles
Machine data
- Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm
- Weight approx. 13,000 kg
- Connected load 400V, 50/60 Hz, 3 phases
Hedpovri Nmofx Afxsfp
The machining center is in good condition. Maintenance and repair work was carried out regularly.
A viewing with power and chips is possible by appointment.
All tools and operating materials shown in the photos are not included in the scope of delivery of the machine.
Technical changes and errors reserved.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Contamine-sur-Arve
1 868 km
CNC Šveitsi tüüpi treipink
TRAUBTNL 32-9 P
TRAUBTNL 32-9 P
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Bad Bramstedt
1 067 km
Vertikaalne töötlemiskeskus
CHIRONFZ 15 W
CHIRONFZ 15 W
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Stockstadt am Rhein
1 448 km
Portaalfreesimismasin
SkymasterVM 2018
SkymasterVM 2018
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Werlte
1 256 km
Universaalne töötluskeskus
HedeliusACURA 65 inkl. Standby Magazin
HedeliusACURA 65 inkl. Standby Magazin
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Częstochowa
945 km
CNC treimis- ja freesimiskeskus
MAZAK NexusVCN-510C
MAZAK NexusVCN-510C
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Bühl
1 559 km
CNC treimis- ja freesimiskeskus
INDEXG 400
INDEXG 400
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 515 km
Töötlemiskeskus - vertikaalne
HAASDM 2
HAASDM 2
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Beringen
1 626 km
Vertikaalne töötlemiskeskus
FEHLMANNPicomax 90 HSC
FEHLMANNPicomax 90 HSC
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 366 km
CNC treipingi
INDEXG300
INDEXG300
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Olching
1 462 km
CNC treipingi-freesimiskeskus
IndexR 200
IndexR 200
Teie kuulutus on edukalt kustutatud
Ilmnes viga






















































































































