ÕHUJAHUTUSEGA ÕHUKUIVATIDProton
ME-LINE
ÕHUJAHUTUSEGA ÕHUKUIVATID
Proton
ME-LINE
Seisund
Uus
Asukoht
Luckenwalde 

Pildid näitavad
Kuva kaart
Andmed masina kohta
Hind ja asukoht
- Asukoht:
- Anhaltstraße 30, 14943 Luckenwalde, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A9010448
- Värskendus:
- viimati kuupäeval 21.02.2025
Kirjeldus
ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above.
EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC.
Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface.
Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting.
Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions.
Each Proton dehumidifier is built to the highest quality standards and comes with regional certification.
The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity.
The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:
Psdpfx Adekw Ukujdjrc
•Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air.
•Avaliable in pre-cooled and after-cooled versions for warm climates.
•Robust design with steelframe, eyebolts etc.
•Vital parts can easily be maintained and exchanged.
•Large air inlet grills and filters.
•Can be built into containers for protection.
•Adjustable dehumidifying capacity and outlet air temperature in 4Grades.
•Outdoor and indoor use.
•Dry air pressure up to 1200 Pa.
Technical. Spec.:
Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.
EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC.
Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface.
Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting.
Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions.
Each Proton dehumidifier is built to the highest quality standards and comes with regional certification.
The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity.
The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:
Psdpfx Adekw Ukujdjrc
•Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air.
•Avaliable in pre-cooled and after-cooled versions for warm climates.
•Robust design with steelframe, eyebolts etc.
•Vital parts can easily be maintained and exchanged.
•Large air inlet grills and filters.
•Can be built into containers for protection.
•Adjustable dehumidifying capacity and outlet air temperature in 4Grades.
•Outdoor and indoor use.
•Dry air pressure up to 1200 Pa.
Technical. Spec.:
Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Saada päring
Telefon & Faks
+49 3371 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga














