Voodi tüüpi freespinkMTE
Kompakt Plus
Voodi tüüpi freespink
MTE
Kompakt Plus
Tootmisaasta
2004
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Nordrhein-Westfalen 

Jälgi oksjonit
Põhiandmed
- Masina nimetus:
- Voodi tüüpi freespink
- Tootja:
- MTE
- Mudel:
- Kompakt Plus
- Masina number:
- 04120594
- Tootmisaasta:
- 2004
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- täielikult töökorras
- Tööajad:
- 29 337 h
Tehnilised andmed
Spindlid
Spindli pöörlemiskiirus (maks.):
12 000 p/min
Telgede spetsifikatsioonid
X-telje liikumisteekond:
2 000 mm
Y-telje liikumisteekond:
895 mm
Z-telje liikumisteekond:
895 mm
Lisateave
Kontrolleri mudel:
Heidenhain iTNC 530
ettevõtmine
- Asukoht:
- Nordrhein-Westfalen, Saksamaa
– Kaugus: ca 1 373 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- EXW
Demontaaži- ja laadimiskulud:
Ülevõtmine asukohast:
tasuta
tasuta
Saatmiskulud:
Kirjeldus
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
Hjdpfx Ae Aknvwjfxsfp
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
Hjdpfx Ae Aknvwjfxsfp
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Maksetüüp:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A23342642
- Viitenumber:
- AUC-2611420
- Värskendus:
- viimati kuupäeval 16.11.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Võimalik üle vaadata
Masin voolu all
Machineseeker soovitab üldiselt masinaid üle vaadata.
Kõik andmed on esitatud parima teadmise ja südametunnistusega – veenduge kohapeal.
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Dortmund
1 358 km
CNC voodijuhi freespink
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Teie kuulutus on edukalt kustutatud
Ilmnes viga























