Mazak Optiplex 3015 Fiber 4kW - Õhklõikus

Mazak OPTIPLEX NEXUS 3015 FIBER

MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW
CNC Fiber Laser Cutting Machine

Price: EUR 190,000 net
Condition: Used – VERY LOW OPERATING HOURS
Resonator: IPG YLS-4000 U

VERY LOW WORKING HOURS

The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition:
- Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h)
- Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways
- Cutting quality and precision comparable to a new machine
- Operating hours confirmed by CNC readout – documentation available upon request or during inspection

TECHNICAL SPECIFICATIONS

Model: Optiplex Nexus 3015 Fiber
Iaodpoy Dgxujfx Ab Ssr
Laser Type: Ytterbium fiber laser
Resonator: IPG YLS-4000 U
Laser Power: 4.0 kW
Max. Sheet Size: 1,525 x 3,050 mm
Max. Pallet Load: 930 kg
Travel (X/Y/Z): 3,100 / 1,580 / 150 mm
Rapid Traverse (X/Y): 60 m/min (85 m/min combined)
Drive X1/X2/Y: Rack & pinion, direct-drive
Drive Z: Servo, ball screw
Accuracy X/Y: ±0.05 mm / 500 mm
Repeatability: ±0.03 mm
Head: Multi-Control Torch 2.1, F125-F200 mm
Assist Gases: O2, air, third gas; 0.02–2.5 MPa
CNC: Mazatrol Preview G, 19" touchscreen
Pallet Changer: Automated, 2-pallet
Weight: Approx. 12,850 kg
Power: 380–480 V, max. 18 kW

CUTTING CAPACITY (4 kW)

Mild steel O2: 20 mm
Mild steel N2: 4 mm
Stainless steel N2: 15 mm
Aluminum N2: 15 mm
Copper O2: 8 mm
Brass N2: 8 mm

INTELLIGENT FUNCTIONS (INCLUDED)

Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut.

SCOPE OF DELIVERY (INCLUDED IN PRICE)

Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN).

OPTIONAL EQUIPMENT – NOT INCLUDED

The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost.

OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net

Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs.

Components:
1. Compressor SK 25 / max. 15 bar / SK.2-13318
2. Condensate Drain Ultramat UFM-D03
3. Economizer Ultra-Filter DF 0035 - DF 1100
4. Ultra-Filter DF 0035 - DF 1100
5. Pressure vessel, 500 l

Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm.

OPTION B – SHEET LOADING CRANE – EUR 5,500 net

Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet.

PRICE SUMMARY (NET, EUR)

Machine only: EUR 190,000
Option A (pressure unit): EUR 15,000
Option B (loading crane): EUR 5,500
Total with both options: EUR 210,500

COMMERCIAL TERMS

- All prices are net, in EUR (VAT not included)
- Offer valid for 30 days
- Payment and delivery terms to be agreed
- Inspection and test cutting available by appointment

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.