Poolautomaatne saagimismasinMACC
320 MS
Poolautomaatne saagimismasin
MACC
320 MS
Seisund
Uus
Asukoht
Concordia Sagittaria 

Pildid näitavad
Kuva kaart
Andmed masina kohta
Hind ja asukoht
- Asukoht:
- Via Levada, 72, 30023 Concordia Sagittaria VE, Italia

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A4424832
- Värskendus:
- viimati kuupäeval 12.11.2024
Kirjeldus
Used MACC 320 MS Semi-automatic sawing machine
Good New " CE "
Data sheet attached.
Ready for delivery unless sold
The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time.
Vertical rotation on pivot with adjustable conical bearings without backlash.
Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw.
Appropriately sized flywheels.
Sturdy belt guides with watertight bearings and adjustable widia plates.
Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control.
Accident prevention safety device on the flywheel cover, on the control knob and on the blade.
Cutting thickness 1,2 mm
Cutting range from 0 to 60° right
Adjustable stop for cuts of the same size
Hodpfx Asfibfaefajw
0.06 kW electric pump for belt cooling
Operation:
start of the cutting cycle by start button, the machine:
1. closes the vice and drives the band motor
2. lowers the arc for cutting
3. the bow returns to the starting position
4. stops the band motor
5. opens the vice
Possibility of manual cutting
ACCESSORIES ON REQUEST :
SINGLE-PHASE motor 69 m/1′
Speed variator from
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Good New " CE "
Data sheet attached.
Ready for delivery unless sold
The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time.
Vertical rotation on pivot with adjustable conical bearings without backlash.
Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw.
Appropriately sized flywheels.
Sturdy belt guides with watertight bearings and adjustable widia plates.
Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control.
Accident prevention safety device on the flywheel cover, on the control knob and on the blade.
Cutting thickness 1,2 mm
Cutting range from 0 to 60° right
Adjustable stop for cuts of the same size
Hodpfx Asfibfaefajw
0.06 kW electric pump for belt cooling
Operation:
start of the cutting cycle by start button, the machine:
1. closes the vice and drives the band motor
2. lowers the arc for cutting
3. the bow returns to the starting position
4. stops the band motor
5. opens the vice
Possibility of manual cutting
ACCESSORIES ON REQUEST :
SINGLE-PHASE motor 69 m/1′
Speed variator from
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2016
Saada päring
Telefon & Faks
+39 0421 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga











