Brikettimispress

mütek MPP 180

Availability upon request.

Very robust machine with high pressing force.
- Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible.

Our best-selling briquetting press series:
+ Proven, simple technology for extremely low failure rates.
+ 25 years of experience, continuous development, and know-how.
+ Several thousand machines in operation with satisfied customers.
+ Excellent price-performance ratio.

Additional cost for demonstration cooling unit: €4,980 net.
(can also be retrofitted later)
* cools the press tongs (important after 4 hours) and the hydraulic oil.
* Cooling unit recommended for regular operation of more than 4 hours at a time.

Commodity code: 84793010,
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Briquette stroke max.: 100 mm,
Briquette stroke opt.: 80 mm,
Capacity (material-dependent): up to 150 kg/h*
* depending on the bulk density,
* based on a bulk density of 200 kg per cubic meter.
Motor power: 9.2 kW,
400 Volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil volume: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Prjdpfx Apod Nm Siovja
Optional cooling for press tongs: yes, with special accessory - coolable press tongs
Optional cooling for hydraulic oil: yes
Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory)
Optional level monitoring: yes
Optional strand briquette: yes (material-dependent)
Optional enlarged feed slide: yes, with special accessory - enlarged feed slide
CE compliant

Requirements for the raw material:
- The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%.
- Chip length max. 20 mm
- Installation temperature: temperature-controlled room with a minimum of +5°C
- The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.