Servade liimimismasin kuni 100 mm liimimiskõrgusegaLange Maschinenbau
        B 70 K-100    
 Servade liimimismasin kuni 100 mm liimimiskõrgusega
Lange Maschinenbau
        B 70 K-100    
                tootmisaasta            
                2018            
            Seisund        
            Kasutatud                    
            Asukoht        
                                                Saksamaa                                            

 Pildid näitavad            
 Kuva kaart            
Andmed masina kohta
- Masina nimetus:
- Servade liimimismasin kuni 100 mm liimimiskõrgusega
- Tootja:
- Lange Maschinenbau
- Mudel:
- B 70 K-100
- Tootmisaasta:
- 2018
- Seisund:
- kasutatud
Hind ja asukoht
- Asukoht:
-             D - Hessen                 
 Helistada            
Pakkumise üksikasjad
- kuulutuse ID:
- A19137466
- Viitenumber:
- ISSH20230727-4468
- Värskendus:
- viimati kuupäeval 28.10.2025
Kirjeldus
        Used machine
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
Rcsdswka S Ijpfx Abyoh
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Year of manufacture: 2018
Special feature: Machine for up to 100 mm edge height!
Condition: Factory-inspected by Lange Maschinenbau
Equipment and technical data:
- Machine table with 13 running rollers for improved workpiece guidance
- Edge feeding, synchronous with belt feed
- Edge thickness adjustable via digital counter
- Pneumatic roller separation with knife (for cuttable edges)
- Three pressure rollers
- Belt feed:
- 0.25 kW
- approx. 1250 mm long
- approx. 6.0 m/min
- 50 mm wide toothed belt with thick, workpiece-friendly rubber top
- Digital counter for height adjustment
- Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill
- Flush cutting unit:
- for front and rear workpiece edges
- automatic sensing at the workpiece
- pneumatic cutting with knife for cuttable edges
- Flush trimming unit
Rcsdswka S Ijpfx Abyoh
- with vertical sensing and horizontal guidance
- reproducible setting using digital counters
- 2 powerful 0.4 kW high-frequency motors
- stepless speed adjustment from 4000 to 18000 rpm
- Cutter Ø 70 mm, Z4, radius 2 mm/15°
- central extraction nozzle Ø 100 mm
- 2 chip extraction hoods with hose Ø 60 mm
- Automatic height adjustment of the upper cutter with belt feed
- Continuous workpiece support approx. 1800 mm long
- Workpiece support rail, extendable by approx. 300 mm
- Rotatable foil dispenser Ø: 800 mm
- Workpiece width: min. approx. 80 mm
- Workpiece thickness: 10 – 100 mm
- Workpiece length: min. approx. 220 mm
- Edge thickness: 0.4 – 2.0 mm
- Roller separation: max. 1.0 x 55 mm, 2 x 45 mm
- Glue pot heating capacity: 2.7 kW
- Heat-up time: approx. 10 minutes
- Working height: approx. 880 mm
- Electrical connection: 400V, 50 Hz, 3Ph + N
- Total connected load: 3.8 kW
- Pneumatic connection: 6 Bar
Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm
Weight: approx. 260 kg
Availability: short-term
Location: Flörsheim
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
            Märkus:        Registreeru tasuta või logi sisse, et saada kogu teave.    
Registreeritud alates: 2008
Saada päring
Telefon & Faks
                            +49 6146 ... kuulutused                
            Teie kuulutus on edukalt kustutatud            
            Ilmnes viga            

















