Roostevabast terasest tsentrifugaalpump Roostevabast terasest pumpKSB
ETANORM-C 150-250 C7
Roostevabast terasest tsentrifugaalpump Roostevabast terasest pump
KSB
ETANORM-C 150-250 C7
fikseeritud hind lisandub käibemaks
8 000 €
tootmisaasta
1991
Seisund
Kasutatud
Asukoht
Radeberg 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Tootja:
- KSB
- Mudel:
- ETANORM-C 150-250 C7
- Tootmisaasta:
- 1991
- Seisund:
- väga hea (kasutatud)
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
fikseeritud hind lisandub käibemaks
8 000 €
- Asukoht:
- Wachauer Straße 13 OT Liegau-Augustusbad, 01454 Radeberg, Deutschland

Helistada
Tehnilised andmed
- Kogumass:
- 520 kg
Pakkumise üksikasjad
- kuulutuse ID:
- A14814703
- Värskendus:
- viimati kuupäeval 07.12.2024
Kirjeldus
Pump was operated on a test bench and has only run for very few operating hours.
Flow rate: 400 m³/h ( 111 liters / second )
Delivery head / delivery pressure: 19 meters / 1.9 bar
Pump speed: 1450 1/min
NPSH required: 3.83 m
Efficiency: 85.7%
Shaft power: 24.04 kW
Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm)
Shaft seal: single mechanical seal
Manufacturer: Burgmann
Impeller type: closed radial impeller
Bearing type: roller bearing
Lubrication type: Grease
Materials of construction
Pump casing: 1.4408 (AISI 316)
Wear plate: 1.4408 (AISI 316)
Pressure cover: 1.4408 (AISI 316)
Shaft: 1.4462
Impeller: 1.4408 (AISI 316)
Bearing bracket: Cast iron EN-GJL-250
Shaft sleeve: CrNiMo steel
Nominal size of suction nozzle: DN 200
Discharge connection Nominal diameter: DN 150
Nominal pressure suction PN 16
Nominal pressure pressure PN 16
Coupling manufacturer: Flender
Coupling type: Eupex NH with intermediate sleeve
Base plate: Painted gray cast iron
Motor manufacturer: VEM
Type: KPER 200 L4
Efficiency class: IE 0
Isdpfxerfdtts Agnoa
Motor speed: 1435 1/min
Frequency: 50 Hz
Rated voltage: 380 / 660 V
Rated motor power: P2: 30 kW
Thermal class: F
Motor protection class: IP54
Cosphi: 0.82
Dimensions:
Length: 1600 mm
Width: 650 mm
Height: 820 mm
Weight: 520 kg
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Flow rate: 400 m³/h ( 111 liters / second )
Delivery head / delivery pressure: 19 meters / 1.9 bar
Pump speed: 1450 1/min
NPSH required: 3.83 m
Efficiency: 85.7%
Shaft power: 24.04 kW
Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm)
Shaft seal: single mechanical seal
Manufacturer: Burgmann
Impeller type: closed radial impeller
Bearing type: roller bearing
Lubrication type: Grease
Materials of construction
Pump casing: 1.4408 (AISI 316)
Wear plate: 1.4408 (AISI 316)
Pressure cover: 1.4408 (AISI 316)
Shaft: 1.4462
Impeller: 1.4408 (AISI 316)
Bearing bracket: Cast iron EN-GJL-250
Shaft sleeve: CrNiMo steel
Nominal size of suction nozzle: DN 200
Discharge connection Nominal diameter: DN 150
Nominal pressure suction PN 16
Nominal pressure pressure PN 16
Coupling manufacturer: Flender
Coupling type: Eupex NH with intermediate sleeve
Base plate: Painted gray cast iron
Motor manufacturer: VEM
Type: KPER 200 L4
Efficiency class: IE 0
Isdpfxerfdtts Agnoa
Motor speed: 1435 1/min
Frequency: 50 Hz
Rated voltage: 380 / 660 V
Rated motor power: P2: 30 kW
Thermal class: F
Motor protection class: IP54
Cosphi: 0.82
Dimensions:
Length: 1600 mm
Width: 650 mm
Height: 820 mm
Weight: 520 kg
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2005
Saada päring
Telefon & Faks
+49 3528 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga


























