Krauss Maffei 1300-8100MX (2016) vähese töötunniga

KraussMaffei 1300-8100MX

KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit

1. Clamping force: 13,000 kN / 1,300 t
2. Mold opening force: 910 kN
3. Moving platen force, opening/closing: 159 / 153 kN
4. Platen dimensions: 2,150 × 1,910 mm
5. Distance between tie bars (H × V): 1,550 × 1,250 mm
6. Opening stroke: 2,350 mm
7. Mold height min./max.: 700 / 1,400 mm
8. Maximum daylight: 3,050 mm
9. Ejector stroke: 350 mm
10. Ejector force forward/backward: 250 / 125 kN
Njdpfx Aheznvy Hsujld
11. Optional increased mold height min./max.: 950 / 1,650 mm
12. Daylight with increased mold height: 3,300 mm

Injection Unit – SP 8100

Screw diameter: 105 mm

1. L/D ratio: 23
2. Maximum injection pressure: 1,778 bar
3. Stroke volume: 4,546 cm³
4. Shot weight PS: 4,137 g
5. Injection flow rate: 805 cm³/s
6. Screw speed nominal/max.: 126 / 159 rpm
7. Plasticizing rate PS at nominal speed: 147 g/s
8. Plasticizing rate PE at nominal speed: 116 g/s
9. Plasticizing rate PS at maximum speed: 187 g/s
10. Plasticizing rate PE at maximum speed: 147 g/s
11. Nozzle contact force: 166 kN

Electro-Hydraulic Equipment

1. Pump motor rated power: 110 kW
2. Installed heating capacity: 59 kW
3. Barrel heating/control zones: 7
4. Dry cycle rate according to Euromap 6: 761 cycles/h
5. Dry cycle time according to Euromap 6: 4.7 s
6. Oil tank capacity: 1,500 l

Dimensions & Weight

1. Net weight incl. control cabinet: 77 t
2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m
3. Maximum mold weight: 29,000 kg

With Electric Screw Drive

1. Screw drive power: 117 kW
2. Screw speed nominal/max.: 123 / 193 rpm
3. Plasticizing rate PS nominal: 144 g/s
4. Plasticizing rate PE nominal: 114 g/s
5. Plasticizing rate PS maximum: 226 g/s
6. Plasticizing rate PE maximum: 178 g/s

With Accumulator (ZE)

1. Injection flow rate: 1,732 cm³/s



Equipment:

1. Removable tie bar (rectable tie bar)
2. Euromap 67 for robot
3. 48 Hotrunner controllers
4. 8 pneumatic cascades
5. 6 hydraulic cascades
6. 2+2 cores



Material used: PP, PC