3-värviline automaatne tampotrükimasinKeller Poligrafia dla Przemysłu
3-colour KELLER Tampo master
3-värviline automaatne tampotrükimasin
Keller Poligrafia dla Przemysłu
3-colour KELLER Tampo master
Tootmisaasta
2018
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Dąbrowa 

Põhiandmed
- Masina nimetus:
- 3-värviline automaatne tampotrükimasin
- Tootja:
- Keller Poligrafia dla Przemysłu
- Mudel:
- 3-colour KELLER Tampo master
- Masina number:
- TAM-164
- Tootmisaasta:
- 2018
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
- Asukoht:
- Polna 9, 62-070 Dąbrówka, Polska

Helistada
Tehnilised andmed
Mõõdud ja kaal
Kogupikkus:
8 200 mm
Kogulaius:
1 880 mm
Kogukõrgus:
1 950 mm
Võimsuse andmed
Sisendpinge:
400 V
Sisendvool:
32 A
Sisendtüüpi vool:
kolmefaasiline
Dokumentatsioon ja sertifikaat
Garantii kestus:
3 kuud
Dokumentatsioon / käsiraamat
Tüübisilt saadaval
CE-märgistus
Lisateave
Tihendatud õhu ühendus:
6 latt
Pneumaatiline ühendus:
12 latt
Servo mootori võimsus:
14 000 W
Pakkumise üksikasjad
- kuulutuse ID:
- A22799870
- Värskendus:
- viimati kuupäeval 23.09.2026
Kirjeldus
Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton.
The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module.
The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container.
Maximum graphic size: 60 × 60 mm
Part dimensions: length 60–150 mm, diameter 8–14 mm.
Machine output: up to 2400 pcs/h.
Electrical power supply: 3 × 400 V, 32 A.
Required compressed air pressure: 6–8 bar.
Iedpfxoz D Ht To Akijii
The machine is operational and in working condition. A link to a video showing the machine in operation is provided below.
Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts.
The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements.
Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world.
Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables.
The price is quoted in EUR.
The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module.
The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container.
Maximum graphic size: 60 × 60 mm
Part dimensions: length 60–150 mm, diameter 8–14 mm.
Machine output: up to 2400 pcs/h.
Electrical power supply: 3 × 400 V, 32 A.
Required compressed air pressure: 6–8 bar.
Iedpfxoz D Ht To Akijii
The machine is operational and in working condition. A link to a video showing the machine in operation is provided below.
Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts.
The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements.
Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world.
Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables.
The price is quoted in EUR.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2026
1 Kuulutus onlines
Saada päring
Telefon & Faks
+48 606 6... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Władysławowo
605 km
Digitaaltrükimasin
DIP TECHGlassJet NOVO
DIP TECHGlassJet NOVO
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Rumeenia
1 282 km
Paberist tasside tootmismasinad
Paper LidPL-145
Paper LidPL-145
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Gdańsk
613 km
Paberimassi termovormimismasin
Taiwan Pulp MoldingTPM-1500
Taiwan Pulp MoldingTPM-1500
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Częstochowa
944 km
Kõrgekvaliteediline meltblown tootmisliin
ReifenhäuserReicofil MB 1600
ReifenhäuserReicofil MB 1600
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Bromley
1 771 km
HP JET FUSION 3D 580
HP580
HP580
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Niederaula
1 311 km
Digitaalne trükimasin
CanonImagepress V900
CanonImagepress V900
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Dresden
1 107 km
Värvimismasin
DuploDuSense DDC-810
DuploDuSense DDC-810
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Enger
1 262 km
Fleksotrükipress
SIATL36-150 TC-CE
SIATL36-150 TC-CE
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Białystok
622 km
Sissepritsevormimis-masin
ENGELDUO 12060/1700
ENGELDUO 12060/1700
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Saksamaa
1 242 km
Fleksograafiline trükiüksus
WDBSMB FD10-4 UV
WDBSMB FD10-4 UV
Teie kuulutus on edukalt kustutatud
Ilmnes viga



























































































































































