Holzma HPP 380/43/43/L plaadijagussaag (2007)

Holzma HPP 380/43/43/L

Saw blade overhang 95 mm
Saw carriage feed:
forward 1-130 m/min
reverse constant 130 m/min
Program slider speed:
forward 80 m/min
reverse 80 m/min
(in EU countries forward = 25 m/min)
Automatic pressure beam height control yes
Cutting height automatic yes
Adjustable pressure beam clamping force yes
Adjustable clamping chuck clamping force yes
Complete dust extraction on machine table (saw body) yes
Angle backstop device
min. backstop width 0 mm
max. backstop width complete cutting length
Main saw motor 18.0 kW
Pre-scoring saw motor 2.2 kW
Operating voltage 400 V / 50 Hz
Electrical connection value for high-performance motor:
18.0 kW = 24 kW
21.0 kW = 27 kW
Working height 920 mm
Paint finish structural paint gray RDS 240 80 05
Main saw blade 380 x 4.4 x 60 mm
Pre-scoring saw blade 180 x 4.4 - 5.4 x 45 mm
Required air pressure 6 bar
Compressed air consumption 150 NL/min
V at the extraction nozzle approx. 26 m/s
Negative pressure min. 1200 Pa
Exhaust air volume 4600 m³/h
Extraction connection chip channel 1 piece 200 mm
Extraction connection pressure beam 1 piece 150 mm

HPP 380/43/43
Cutting length 4300 mm
Cutting width (program slider travel) 4250 mm
Roller rail (element 10-track) 1 piece
Roller rail (element 2-track) 5 pieces
Clamping chucks 7 pieces
of which the first 3 pieces are two-finger,
all others are single-finger
Spacing 75/275/475/1050/1850/2650/3450 mm
measured from the angle ruler to the center
Hjdpfezuph Djx Adronr
Clamping chuck
2 additional two-finger clamping chucks possible
Pos. 175/375 mm
1 additional single-finger clamping chuck possible
Pos. 650 mm
4 manual trimming fences on clamping chucks
Pos. 75/475/1050/2650 mm
Air cushion table with roller element
2160 x 650 mm 4 pieces
Central blower 1 piece
Nozzle spacing of the air cushion tables 70 x 70 mm

Angle cutting device (automatic)
Angle cutting faster and more precisely than ever before, with patented angle cutting clamping chuck.

Technical data
Max. panel thickness: 48 mm
Min. leg length at 45°: 115 mm
Angle accuracy at 1000 mm: 0.1°
Min. cutting angle: 0.0°

Option 6085 'Angle cutting mask' required.

Groove program (manual) Type 180/230/250/350/380
Groove program with graphic input and process graphics.
Groove depth manually adjustable.

Turbo grooves Type 350/380/510/530/550/570
Longitudinal grooves with the main saw in forward and reverse.
Especially suitable for bending parts.
Note: Grooves in reverse are not 100% tear-free.

Cut-out/stress-relief cutting program
Consisting of:
- Cut-out program
- Insert grooves (option 6055 or 6050 required)
- Stress-relief cut (1-stage/2-stage/3-stage)
Positioning accuracy +/- 2 mm
Without hydraulic stop!

Label program 350/380/11/510/530/550/570/33
Label printer Type PICA 104
Thermo / Thermal transfer label printing station

Angle cutting mask CADMATIC
In the case of angle cuts, this
software provides automatic stop control,
so that a time-consuming manual alignment of the
material on the cutting line is no longer necessary.

Data transfer Online + USB port

Optimization software “CADplan JUST-IN-TIME”

The lifting device shown in the pictures is not included.

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.