ServakantmasinHebrock
K36
Servakantmasin
Hebrock
K36
Alghind hind
45 000 €
Tootmisaasta
2024
Seisund
Kasutatud
Asukoht
Berlin 

Jälgi oksjonit
Andmed masina kohta
- Masina nimetus:
- Servakantmasin
- Tootja:
- Hebrock
- Mudel:
- K36
- Tootmisaasta:
- 2024
- Seisund:
- töövalmis (kasutatud)
Tehnilised andmed
- Tooriku kõrgus (maks.):
- 60 mm
- X-telje etteandekiirus:
- 10 m/min
- Spindli pöörlemiskiirus (maks.):
- 16 000 p/min
- Juhtimistüüp:
- PLK-juhitud
ettevõtmine
- Asukoht:
- Berlin, Saksamaa
– Kaugus: ca 993 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- EXW
Demontaaži- ja laadimiskulud:
Ülevõtmine asukohast:
tasuta
tasuta
Saatmiskulud:
Kirjeldus
The machine has already been disassembled and stored by a specialist.
TECHNICAL DETAILS
Rotational speed of the miter saw station: approx. 16,000 rpm
Rotational speed of the milling station: approx. 16,000 rpm
Maximum milling depth: 3 mm
Design for edge thickness: 1 mm
Hot melt adhesive specification for edge material max.: 3 mm
Feed rate: approx. 10 m/min
Maximum workpiece thickness: 60 mm
EQUIPMENT
Maintenance-free, coated glue basin with provision for interchangeable basins
Glue dispensing device
Pneumatic milling adjustment
Combination design with interchangeable plate cutter
Corner rounding milling cutter
Radius drawing blade
Surface drawing blade with pneumatic extraction device
Cleaning station
Robust chain drive
Ball-bearing mounted double roller pressure pad
Aggregate viewing window from the machine's rear and operator side
Signal lamp for workpiece sequence
Extendable workpiece support
ACCESSORIES
Hebrock 8 mm version
Hebrock quick-change system for corner milling cutter
Hodpfx Acezb Idfolsfh
Hebrock jointing up to 60 mm workpiece thickness
Hebrock protective spray for edges
Hebrock nesting (milling cutter + radius drawing blade)
Hebrock Airtronic
Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
TECHNICAL DETAILS
Rotational speed of the miter saw station: approx. 16,000 rpm
Rotational speed of the milling station: approx. 16,000 rpm
Maximum milling depth: 3 mm
Design for edge thickness: 1 mm
Hot melt adhesive specification for edge material max.: 3 mm
Feed rate: approx. 10 m/min
Maximum workpiece thickness: 60 mm
EQUIPMENT
Maintenance-free, coated glue basin with provision for interchangeable basins
Glue dispensing device
Pneumatic milling adjustment
Combination design with interchangeable plate cutter
Corner rounding milling cutter
Radius drawing blade
Surface drawing blade with pneumatic extraction device
Cleaning station
Robust chain drive
Ball-bearing mounted double roller pressure pad
Aggregate viewing window from the machine's rear and operator side
Signal lamp for workpiece sequence
Extendable workpiece support
ACCESSORIES
Hebrock 8 mm version
Hebrock quick-change system for corner milling cutter
Hodpfx Acezb Idfolsfh
Hebrock jointing up to 60 mm workpiece thickness
Hebrock protective spray for edges
Hebrock nesting (milling cutter + radius drawing blade)
Hebrock Airtronic
Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Makseviisid:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A22079588
- Viitenumber:
- AUC-2606095
- Värskendus:
- viimati kuupäeval 08.06.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Võimalik üle vaadata
Machineseeker soovitab üldjuhul kasutatud masinaid üle vaadata.
Kõik andmed on esitatud parima teadmise ja südametunnistusega – veenduge kohapeal.
Artiklid samast asukohast:
Oksjon
Lõpeb
d
h
min
s
Oksjon lõppenud
Berlin
993 km
Kruvikompressor
RennerRSKF-PRO 7,5
RennerRSKF-PRO 7,5
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Bitburg
1 530 km
Servade liimimismasin
HEBROCKK36 Neumaschine sofort verfügbar -
HEBROCKK36 Neumaschine sofort verfügbar -
Väike kuulutus
Saksamaa
1 345 km
Servade liimimismasin
Lange MaschinenbauB 90 KFE
Lange MaschinenbauB 90 KFE
Väike kuulutus
Bad Honnef
1 435 km
Servapealistusmasin HEBROCK K36 Airtronic -kasutatud-
HEBROCKK36
HEBROCKK36
Väike kuulutus
Κιλκίς
1 965 km
Servalindimasin Hebrock K36
HEBROCKK36
HEBROCKK36
Väike kuulutus
Grońsko
884 km
Servakantmasin
HebrockF4
HebrockF4
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Teie kuulutus on edukalt kustutatud
Ilmnes viga























































































