2011 Hardinge GX 1000Hardinge
GX 1000
2011 Hardinge GX 1000
Hardinge
GX 1000
tootmisaasta
2011
Seisund
Kasutatud
Asukoht
Bristol 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- 2011 Hardinge GX 1000
- Tootja:
- Hardinge
- Mudel:
- GX 1000
- Tootmisaasta:
- 2011
- Seisund:
- kasutatud
Hind ja asukoht
- Asukoht:
- Bristol, UK

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A18281111
- Viitenumber:
- cmu/0501
- Värskendus:
- viimati kuupäeval 16.01.2025
Kirjeldus
Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set.
SPECIFICATION:
TRAVELS:
X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm
Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm
TABLE:
Length 1120 mm, Width 540 mm
Fpedpfxjvq Ry Dj Ag Aep
T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of
Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg
SPINDLE:
Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque
82.76 Nm, Drive System Direct Speed Belt Drive, Taper
BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled
FEEDRATES:
Rapid and Jog (Max.) 36 m.min
Cutting Feed Rate (Max.) 12 m.min
AXIS MOTORS:
Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW
TOOL CHANGER:
Type Carousel, Capacity 20
Max tool diameter 89 mm
Tool length Max. 250 mm
Tool weight Max. 6 kg
Tool change time 6 sec
GENERALS:
Air Required 4 scfm, 700 psi /min
Power supply 45A FLA / 400 v / 3 phase
Coolant
Capacity 360 L
Control: Siemens 828D
Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40
Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC
SPECIFICATION:
TRAVELS:
X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm
Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm
TABLE:
Length 1120 mm, Width 540 mm
Fpedpfxjvq Ry Dj Ag Aep
T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of
Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg
SPINDLE:
Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque
82.76 Nm, Drive System Direct Speed Belt Drive, Taper
BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled
FEEDRATES:
Rapid and Jog (Max.) 36 m.min
Cutting Feed Rate (Max.) 12 m.min
AXIS MOTORS:
Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW
TOOL CHANGER:
Type Carousel, Capacity 20
Max tool diameter 89 mm
Tool length Max. 250 mm
Tool weight Max. 6 kg
Tool change time 6 sec
GENERALS:
Air Required 4 scfm, 700 psi /min
Power supply 45A FLA / 400 v / 3 phase
Coolant
Capacity 360 L
Control: Siemens 828D
Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40
Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2022
Saada päring
Telefon & Faks
+44 117 3... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga









