3690-liitrine soojendatav/jahutatav V4A reaktor talaga segistigaHANAG
8758
3690-liitrine soojendatav/jahutatav V4A reaktor talaga segistiga
HANAG
8758
fikseeritud hind lisandub käibemaks
20 500 €
Seisund
Kasutatud
Asukoht
Bremen 

Pildid näitavad
Kuva kaart
Hind ja asukoht
fikseeritud hind lisandub käibemaks
20 500 €
- Asukoht:
- Bremen

Helistada
Tehnilised andmed
- Paagi maht:
- 3 690 l
Pakkumise üksikasjad
- kuulutuse ID:
- A20349560
- Viitenumber:
- 8758
- Värskendus:
- viimati kuupäeval 05.12.2025
Kirjeldus
GENERAL INFORMATION
Design: suspension-mounted
Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies
Speed: 42 - 211 rpm
Internal diameter: 1,600 mm
Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Total height: 3,750 mm
Heating/Cooling: available
Power: 3 kW
Max. allowable operating temperature: 200 °C
Max. allowable operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: blade agitator
Support design: ring mounting
Location: Bremen
Technical documentation: drawing, various documents, inspection certificate
Cylinder temperature control: half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 3,690 litres
Double jacket volume: 145.0 litres
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Last application: pharmaceutical chemistry
VESSEL
Max. allowable operating temperature: 200 °C
HEATING/COOLING JACKET
Max. allowable operating underpressure: 1.0 bar
Gksdpfsxqax Eex Abvof
Bottom temperature control: half-pipe coil
EQUIPMENT
Manway / dome: in top head (DN 500)
Outlet: 130 mm
MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt
TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator positioning: centred on the top head
Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available
Top head wall thickness: 7.9 mm
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Design: suspension-mounted
Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies
Speed: 42 - 211 rpm
Internal diameter: 1,600 mm
Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Total height: 3,750 mm
Heating/Cooling: available
Power: 3 kW
Max. allowable operating temperature: 200 °C
Max. allowable operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: blade agitator
Support design: ring mounting
Location: Bremen
Technical documentation: drawing, various documents, inspection certificate
Cylinder temperature control: half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 3,690 litres
Double jacket volume: 145.0 litres
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Last application: pharmaceutical chemistry
VESSEL
Max. allowable operating temperature: 200 °C
HEATING/COOLING JACKET
Max. allowable operating underpressure: 1.0 bar
Gksdpfsxqax Eex Abvof
Bottom temperature control: half-pipe coil
EQUIPMENT
Manway / dome: in top head (DN 500)
Outlet: 130 mm
MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt
TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator positioning: centred on the top head
Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available
Top head wall thickness: 7.9 mm
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2019
Saada päring
Telefon & Faks
+49 421 5... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga













































































