Puurpinkide puurimismasin Tüvipuurimismasin

GANNOMAT mit Lieferung nach D und in EU

Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323

Very good condition, the machine is absolutely like new. It comes from an educational institution that was closed approximately one year after the machine was purchased.
The machine has a maximum of 10 operating hours.
With this machine, you can mill slots and drill dowel holes on two levels without reclamping.
380V, 1500W
2800 rpm
Year of manufacture: 2005

With this machine, you can mill slots for, for example, lock cases and similar parts, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints.
Ideal for producing dowel joints in timber frame construction, furniture, door, window, and stair manufacturing, and similar applications.
Thanks to two-level drilling, stop grids, and the overall design, dowel joints can be produced extremely quickly, making the machine highly economical.

Features:
- 2 fold-out table extensions
- Machine requires a compressed air connection (6 bar, very low air consumption)
- Right-hand rotation
- Very clean and precise milling and drilling
- Supplied with 2 angle stops (one center stop and one side stop, which can be used on both sides)
- Also includes an adjustable mitre stop
- At the front of the working table, there is a 2000mm long stop rail with two flip stops each. The stop rail can be shortened or extended as required.
- Workpiece clamping is carried out with 2 pneumatic clamping cylinders
- Height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch is at the front of the machine, enabling fast repositioning and level changes
Hedpfjxqy Dnsx Abvopa
- Heights of the individual drilling levels can be read on 2 mechanical counters, above which there are setting screws to adjust the drilling heights
- With a precision 12mm indexing rail, featuring a center index and 12 indexes to the left and right
- Can be quickly converted for slot mortising; the machine can then be used without indexing and with 2 adjustable stops left and right, giving a maximum working width of 420mm
- Max. drilling height: 100mm
- Max. drilling depth: 150mm (with stop and scale)
- Max. workpiece height: 160mm

Everything works perfectly.
The machine will be delivered and demonstrated personally by us throughout Germany for €220, so there is no risk for you when buying. Delivery to Austria and the EU is also possible upon request.

The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle.
Professional machine, not DIY store scrap.
Ready for immediate operation.
Includes 2-jaw drill chuck up to 20mm.
Very sturdy and durable construction.
Precision linear guides with play-free ball bearing bushes are in good condition and move smoothly.

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.