LaminaatorFoliant
Vega 400A Laminator
Laminaator
Foliant
Vega 400A Laminator
Tootmisaasta
2017
Seisund
Kasutatud
Asukoht
Wakefield 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- Laminaator
- Tootja:
- Foliant
- Mudel:
- Vega 400A Laminator
- Tootmisaasta:
- 2017
- Seisund:
- väga hea (kasutatud)
Hind ja asukoht
- Asukoht:
- Unit 1A Thornes Lane Wharf, WF1 5RF Wakefield, United Kingdom

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A20812267
- Viitenumber:
- 11050
- Värskendus:
- viimati kuupäeval 22.12.2025
Kirjeldus
Ref:11050 . 2017 Foliant Vega 400A Laminator.
New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs.
Equipped with:
Integrated deep pile vacuum feeder and a high-speed bump separator
Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system.
Pneumatic high-pressure system (with integrated compressor inside machine frame)
Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too.
The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm).
Feeder:
Equipped with a rising pile front separation stream feeder and with a vacuum belt head.
Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum.
Overlaps are controlled, in an ‘in-run’ mode.
Accuracy is +/- 2 mm under-lap (in a constant speed).
Fitted with a lifting plate and its capacity is a 28 cm pile of paper.
Laminator:
Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4).
The minimum sheet size is 20 x 30 cm.
Compressor is integrated inside the machine frame as standard.
Laminating unit is equipped with an adjustable twin decurl unit:
• With a decurl blade for offset printed sheets decurling
• With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).
Roll of a film is mounted on a quick-changed shaft with a film tension control breaker.
Shaft capacity is up to 3000 m of the 24 - 42 microns film.
Film holder unit is equipped with an in-line trim slitter and a perforating wheel.
2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface.
Pressure is pneumatically adjustable.
Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor.
Warming up time is shorter than 10 minutes.
Controlled by an interactive, easy understandable icon based touch screen
System includes many automation items for an easy control of the machine and a reliable lamination.
Separator:
Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers.
Separated sheets are delivered into a vibrating jogger
Laminating Films:
BOPP films (24 – 42 microns)
Nylon films (24 - 35 microns)
Specification:
Maximal Speed: single side 18 m/min.
Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm
Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm
Paper Weight: 115–500 g/m²
Main Roller Pressure System: Pneumatic
Minimal Sheets Size (w×l): 20×30 cm
Lodpox Nftnsfx Abkoak
Maximal Sheets Size (w×l): 38x66 cm
Maximal Performance: 2100 B3 / hod.
Temperature Control: 80–140 °C, Warming Up Time 8 min
Power Supply: 230 V AC, 50-60 Hz
Power: 3150 W
Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg
New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs.
Equipped with:
Integrated deep pile vacuum feeder and a high-speed bump separator
Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system.
Pneumatic high-pressure system (with integrated compressor inside machine frame)
Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too.
The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm).
Feeder:
Equipped with a rising pile front separation stream feeder and with a vacuum belt head.
Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum.
Overlaps are controlled, in an ‘in-run’ mode.
Accuracy is +/- 2 mm under-lap (in a constant speed).
Fitted with a lifting plate and its capacity is a 28 cm pile of paper.
Laminator:
Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4).
The minimum sheet size is 20 x 30 cm.
Compressor is integrated inside the machine frame as standard.
Laminating unit is equipped with an adjustable twin decurl unit:
• With a decurl blade for offset printed sheets decurling
• With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks).
Roll of a film is mounted on a quick-changed shaft with a film tension control breaker.
Shaft capacity is up to 3000 m of the 24 - 42 microns film.
Film holder unit is equipped with an in-line trim slitter and a perforating wheel.
2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface.
Pressure is pneumatically adjustable.
Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor.
Warming up time is shorter than 10 minutes.
Controlled by an interactive, easy understandable icon based touch screen
System includes many automation items for an easy control of the machine and a reliable lamination.
Separator:
Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers.
Separated sheets are delivered into a vibrating jogger
Laminating Films:
BOPP films (24 – 42 microns)
Nylon films (24 - 35 microns)
Specification:
Maximal Speed: single side 18 m/min.
Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm
Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm
Paper Weight: 115–500 g/m²
Main Roller Pressure System: Pneumatic
Minimal Sheets Size (w×l): 20×30 cm
Lodpox Nftnsfx Abkoak
Maximal Sheets Size (w×l): 38x66 cm
Maximal Performance: 2100 B3 / hod.
Temperature Control: 80–140 °C, Warming Up Time 8 min
Power Supply: 230 V AC, 50-60 Hz
Power: 3150 W
Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2021
Saada päring
Telefon & Faks
+44 1924 ... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Öpfingen
1 521 km
Vaiapööraja
PolarPW-1
PolarPW-1
Väike kuulutus
Saksamaa
1 242 km
2025 Polar N78 PLUS
PolarN78 PLUS
PolarN78 PLUS
Väike kuulutus
Emskirchen
1 368 km
Poolautomaatne fooliumi sulgemismasin
ROBOPACARIANE 5040 2TM
ROBOPACARIANE 5040 2TM
Väike kuulutus
Bagsværd
819 km
Heidelberg Stahlfolder Ti 52 /6 . Fi52.1
Heidelberg StahlfolderTi 52 /6 . Fi52.1
Heidelberg StahlfolderTi 52 /6 . Fi52.1
Väike kuulutus
Itaalia
1 791 km
Painutuspink
MorganaDigifold Pro
MorganaDigifold Pro
Väike kuulutus
Dresden
1 107 km
Kokkupandav masin
HorizonAFC-566-F
HorizonAFC-566-F
Väike kuulutus
Neuhausen
1 520 km
Kokkupandava kartongi liimimismasin
ETERNA (Bobst)EFOLD 1100 ELITE
ETERNA (Bobst)EFOLD 1100 ELITE
Väike kuulutus
Norderstedt
1 072 km
Wire-O köitemasin, poolautomaatne
RenzRSB 360
RenzRSB 360
Väike kuulutus
Saksamaa
1 242 km
1985 Polar 76 EM
Polar76 EM
Polar76 EM
Väike kuulutus
Dollern
1 110 km
Lõikamismasin
POLAR66
POLAR66
Teie kuulutus on edukalt kustutatud
Ilmnes viga




























































