Platvorm / tentkateFliegl
SDS 390 RoadRunner
Platvorm / tentkate
Fliegl
SDS 390 RoadRunner
EXW Fikseeritud hind lisandub käibemaks
9 500 €
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Triptis 

Põhiandmed
- Masina nimetus:
- Platvorm / tentkate
- Tootja:
- Fliegl
- Mudel:
- SDS 390 RoadRunner
- Masina number:
- WFDFLT33902017848
- Seisund:
- kasutatud
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
EXW Fikseeritud hind lisandub käibemaks
9 500 €
- Asukoht:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Helistada
Tehnilised andmed
Mõõdud ja kaal
Kogumass:
35 000 kg
Tühimass:
6 537 kg
Maksimaalne kandevõime:
28 463 kg
Kogupikkus:
13 850 mm
Kogulaius:
2 550 mm
Kogukõrgus:
4 000 mm
Laadimisruumi pikkus:
13 650 mm
Laadimisruumi laius:
2 480 mm
Laadruumi kõrgus:
2 790 mm
Teljed ja rattad
Telje konfiguratsioon:
3 teljed
Vedrustus:
õhk
Rehvi suurus:
385/65 R22.5"
Lisateave
Esmane registreerimine:
10/2015
Värv:
hõbedane
Pakkumise üksikasjad
- kuulutuse ID:
- A9058631
- Viitenumber:
- 37357
- Värskendus:
- viimati kuupäeval 06.06.2026
Kirjeldus
The images are archive images! The vehicle may be in use!
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
Njdpfxjkyrmio Adcjdc
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm.
Njdpfxjkyrmio Adcjdc
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h).
Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg.
Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection.
Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2006
200 Kuulutused internetis
Saada päring
Telefon & Faks
+49 36482... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Edukas
Teie sõnum on saadetud.
Väike kuulutus
Triptis
1 211 km
Avatud poolhaagis tentkattega
FLIEGL3-Achs Gardine SDS 390 RoadRunner
FLIEGL3-Achs Gardine SDS 390 RoadRunner
Teie kuulutus on edukalt kustutatud
Ilmnes viga








































