Töötamisplatvorm poolhaagisFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 Töötamisplatvorm poolhaagis
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     fikseeritud hind lisandub käibemaks                                            
                                            49 750 €                                    
            Seisund        
            Kasutatud                    
            Asukoht        
                                                Essen                                            

 Pildid näitavad            
 Kuva kaart            
Andmed masina kohta
Hind ja asukoht
                             fikseeritud hind lisandub käibemaks                    
                            49 750 €                    
- Müüja asukoht:
-     Heegstraße 6-8, 45356 Essen, Saksamaa             
 Helistada            
Tehnilised andmed
- Maksimaalne kandevõime:
- 38 390 kg
- Kogumass:
- 48 000 kg
- Telje konfiguratsioon:
- 3 teljed
- Esmane registreerimine:
- 03/2024
- Järgmine ülevaatus (TÜV):
- 03/2026
- Kogulaius:
- 2 540 mm
- Varustus:
- ABS
Pakkumise üksikasjad
- kuulutuse ID:
- A20421315
- Viitenumber:
- 33271
- Värskendus:
- viimati kuupäeval 31.10.2025
Kirjeldus
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
Rcedpsxth Adjfx Abysh
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
Rcedpsxth Adjfx Abysh
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
            Märkus:        Registreeru tasuta või logi sisse, et saada kogu teave.    
Registreeritud alates: 2003
Saada päring
Telefon & Faks
                            +49 201 8... kuulutused                
            Teie kuulutus on edukalt kustutatud            
            Ilmnes viga            
















