Madala platvormiga poolhaagis

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment. Full equipment details available upon request.

Gooseneck:
- Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood floor covering approx. 30 mm thick

Loading area:
- 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
- Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section
- Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D)
- Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each
- Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H))
- 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN)
- 5 pairs of flip-out lashing rings (LC 5,000 daN)
- 3 pairs of flip-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN)
- Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN)

One-piece Steel Ramps:
- One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramp with hydraulic lifting mechanism, hydraulically adjustable
- Maximum load per pair: 40,000 kg
- In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position

Landing gears:
- JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Axles:
- BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
- Technical axle load: 12,000 kg each
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tool kit

Lhedpfx Agew Tpqwjdjg
Tyres:
- Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice
- TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data

Braking system:
- WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel construction:
- Steel structure made of high-tensile fine-grain steels
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Electrical system:
- Electrical system according to EU regulations
- Lighting 24 volts ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Paintwork:
- Complete steel structure automatically shot-blasted with blasting wheel machine after welding
- Second shot-blasting using corundum for optimal coating adhesion
- HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection
- Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL
- Rims in silver
- Rear section metallized and in RAL 9010 (continuation see ori

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.