Haagis tööplatvormiga

ES-GE Tandemanhänger - Rungen - CV

You can find our complete inventory of immediately and short-term available vehicles on our website.

Below is an excerpt from the equipment. Full specification available upon request.

Chassis:
* Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity
* Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame

Underrun protection:
* In accordance with EU regulations

Landing legs:
* Front: landing legs with single-sided operation
* Rear support: two adjustable drop legs

Axles:
* 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function

Tyres:
* 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset

Splash guards:
* PVC splash guards in front of and behind the axles as per EU regulations

Load securing:
* On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t
* 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t
* Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed

Brake system:
* Compressed air brake system according to EU regulations with EBS
* Two coils as coupling to the truck, red/yellow coupling heads
* Spring-loaded parking brake acting on one axle

Floor:
* Approx. 28 mm Z hardwood floor recessed into the outer frame

Lighting system:
* Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors

Accessories:
* 2 wheel chocks with holders
* Detachable flashing beacon at the rear
* 40 mm towing device supplied (GVW max. 13,500 kg)
* Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053
* 4 rows of stake pockets across the loading area, evenly distributed
Bljdey Auf Tspfx Al Rog
* 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1 x 20' container
* Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452
* 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles

Paintwork:
* Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard
* Body components cleaned, primed, and hot-dip galvanized
* Chassis: hot-dip galvanized + RAL 9011 graphite black
* Outer frame: hot-dip galvanized + RAL 9010 pure white
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Fittings: galvanized / KTL black

Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.