Vertikaalne treipingi

EMAG VLC 400

turning diameter 400 mm
turning height 300 mm
swing diameter 520 mm
workpiece weight 60 kg
x-axis 995 mm
y-axis +/-30 mm
z-axis 580 mm
chucking diameter max. 500 mm
Tool drive speed max. 6.000 1/min
Main spindle drive power 37 KW
tool turret with 12 work positions BMT75
total power requirement 55 kW
weight of the machine ca. 13,5 t
Circulating workpiece transport system, O-design
Drag frame system for 10 workpieces
Coolant supply: 15 bar
Coolant pump with a flow rate of approx. 80 l/min at 15 bar.
Cooling unit (6.5 kW, water-air)
A cooling unit (with dual-circuit technology) regulates the machine's thermal balance.
The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C).
Dual coolant filter, manually switchable
Filter mesh 100 µm, with electrical and mechanical contamination indicator
Chip conveyor
Hinged belt design: to the rear
Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l)
Emulsion mist extraction: Extraction capacity approx. 800 m3/h
Flushing gun
Workpiece measurement with measuring probe
Blow-off measuring probe
Tool life monitoring (sister tool management)
Tool breakage monitoring TOOLINSPECT MCU-EUROPA
Axial drilling and milling head - BMT75 CC
5x 90° angle drilling and milling heads - BMT75 CC (i=1:1)
Tool set for OP10 + OP20

Hydraulic full clamping cylinder size 150 - with 1 media feed-through
Max. tensile force 10,850 daN at 70 bar

Coolant through the spindle
Programmable clamping pressure adjustment

3-jaw power chuck KNCS-N 500-155 quick-change
Max. = 2,200 rpm (standard speed according to DIN 6386)
Set of hard base jaws
Set of soft top jaws

Attachments for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 External finishing cutter
1x 8.BMT25VL8IKX50 External roughing cutter
1x 60.7516VL8IKDI15 Engraving tool
1x 60.7516VL8IKDI15 Tapping chuck
1x 40.75V5KRVL8IKD 50mm cutter head
Hsdpfex H Aibsx Abvjfr
3x 80.75V5VL8IKD boring bar holder
2x 27.V520HYDL26 drill bits, 20mm diameter
1x 42.V522L08Ik drill bits, 22mm diameter
1x 27.V514WNL31 Drill Bit Diameter 14mm

Software Package
Operating Instructions / Maintenance Manual