Konveierdie magnetprofis
Konveier
die magnetprofis
fikseeritud hind lisandub käibemaks
3 520 €
Tootmisaasta
2025
Seisund
Kasutatud
(täielikult töökorras)
Asukoht
Ursberg 

Andmed masina kohta
- Masina nimetus:
- Konveier
- Tootja:
- die magnetprofis
- Tootmisaasta:
- 2025
- Seisund:
- nagu uus (kasutatud)
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
fikseeritud hind lisandub käibemaks
3 520 €
- Asukoht:
- Oberrohrer Straße 8/10, 86513 Ursberg, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A22159062
- Värskendus:
- viimati kuupäeval 19.06.2026
Kirjeldus
The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price.
Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces.
Horizontal section: 750mm
Rising section: 2,300mm
Inclination angle at the bend: 60°
Height of the horizontal section: 250mm
Conveyor belt length measured on the floor: 1,900mm
Discharge height: 2,200mm
Design:
Aluminum construction
- 2x profile reinforced 90x45mm
- Full-surface wear plate, 2.0mm, galvanized
Drive roller + deflection roller, S235 steel, welded and machined
Ø100x520mm, crowned, shaft fixed with tension bearings
Drive: Gearmotor, 0.55KW, speed 0.53m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive ready for connection up to the motor terminal box
(Commissioning must be carried out by a qualified electrician)
Ppodpfxozfi A Ae An Eju
PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte
Conveyor belt width: 500mm
2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded
21 pieces of T-40 studs, 300mm long, approx. 300mm spacing
Belt material: 2-layer, particularly dimensionally stable in the transverse direction
In the bend area, the belt is guided on both sides with 2 pressure rollers each.
The belt is designed with a border-free zone of 70mm on both sides.
Due to the wave edge on both sides, the usable width of the conveyor belt is reduced:
Usable width: 300mm, as follows:
(Top view) Transverse arrangement: 70+25+5+300+5+25+70mm
Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm
- Including recess in the wear plate
- Including sliding joints in the drive and deflection roller
Inspection possible after consultation
Price is net, plus 19% VAT.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces.
Horizontal section: 750mm
Rising section: 2,300mm
Inclination angle at the bend: 60°
Height of the horizontal section: 250mm
Conveyor belt length measured on the floor: 1,900mm
Discharge height: 2,200mm
Design:
Aluminum construction
- 2x profile reinforced 90x45mm
- Full-surface wear plate, 2.0mm, galvanized
Drive roller + deflection roller, S235 steel, welded and machined
Ø100x520mm, crowned, shaft fixed with tension bearings
Drive: Gearmotor, 0.55KW, speed 0.53m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive ready for connection up to the motor terminal box
(Commissioning must be carried out by a qualified electrician)
Ppodpfxozfi A Ae An Eju
PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte
Conveyor belt width: 500mm
2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded
21 pieces of T-40 studs, 300mm long, approx. 300mm spacing
Belt material: 2-layer, particularly dimensionally stable in the transverse direction
In the bend area, the belt is guided on both sides with 2 pressure rollers each.
The belt is designed with a border-free zone of 70mm on both sides.
Due to the wave edge on both sides, the usable width of the conveyor belt is reduced:
Usable width: 300mm, as follows:
(Top view) Transverse arrangement: 70+25+5+300+5+25+70mm
Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm
- Including recess in the wear plate
- Including sliding joints in the drive and deflection roller
Inspection possible after consultation
Price is net, plus 19% VAT.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Registreeritud alates: 2016
98 Kuulutused internetis
Saada päring
Telefon & Faks
+49 8236 ... kuulutused
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Ursberg
1 495 km
Magnetlint Overband Magnet Shredder
die magnetprofisPEM1200
die magnetprofisPEM1200
Väike kuulutus
Abtenau
1 449 km
Puusepatööd
AUERTECHBlockhausfräse BL100A, Bj.2006
AUERTECHBlockhausfräse BL100A, Bj.2006
Väike kuulutus
Dinkelscherben
1 485 km
Nakkuse kaitsesein viiruse akrüül
die magnetprofisModel 1000 x 1000mm
die magnetprofisModel 1000 x 1000mm
Väike kuulutus
Dinkelscherben
1 485 km
Lameda konveierilindi konveierilint
die magnetprofis1500x500+W+U
die magnetprofis1500x500+W+U
Väike kuulutus
Roches-Prémarie-Andillé
2 123 km
Puutöömasin
KRUZI
KRUZI
Väike kuulutus
Dinkelscherben
1 485 km
Nakkuse kaitsesein Kaitsesein
die magnetprofisModel 1000 x 800mm
die magnetprofisModel 1000 x 800mm
Väike kuulutus
Dinkelscherben
1 485 km
Kaldu konveierilint Konveiersüsteem puistematerjalid
die magnetprofis2021090217
die magnetprofis2021090217
Väike kuulutus
Ursberg
1 495 km
Puiduhakkur
die magnetprofisWinkelförderband Z-Förderband
die magnetprofisWinkelförderband Z-Förderband
Väike kuulutus
Ursberg
1 495 km
Nurkkonveierilint L Konveierilindi tühjendamine
die magnetprofis2022042210
die magnetprofis2022042210
Väike kuulutus
Ursberg
1 495 km
Demetallisatsioonitehas
die magnetprofisDMPM2000
die magnetprofisDMPM2000
Väike kuulutus
Liverpool
1 810 km
Automaatne nurgasaag
CAMAMTAC1
CAMAMTAC1
Väike kuulutus
Ursberg
1 495 km
Filter grid Filter Magnetigrid
die magnetprofisDMPMFG200x200
die magnetprofisDMPMFG200x200
Väike kuulutus
Ursberg
1 495 km
Woodchip Magnetic Separator Overband
die magnetprofisPEM1200
die magnetprofisPEM1200
Väike kuulutus
San Giovanni Al Natisone
1 608 km
Friulmac mod. FN3 Hüdrauliline ristsaag ja laadija höövlite jaoks, maksimaalne pikkus 3500 mm
FriulmacDual Feed
FriulmacDual Feed
Väike kuulutus
Ursberg
1 495 km
Teraskonveier põllumajanduse konveier
die magnetprofisStahlförderband Haldenband Förderband
die magnetprofisStahlförderband Haldenband Förderband
Teie kuulutus on edukalt kustutatud
Ilmnes viga











































































