Demag Ergotech System 2000-840 (2003)Demag
Concept 80/420-120
Demag Ergotech System 2000-840 (2003)
Demag
Concept 80/420-120
Tootmisaasta
2006
Seisund
Kasutatud
Asukoht
Trenčianske Stankovce 

Põhiandmed
- Masina nimetus:
- Demag Ergotech System 2000-840 (2003)
- Tootja:
- Demag
- Mudel:
- Concept 80/420-120
- Tootmisaasta:
- 2006
- Seisund:
- kasutatud
Hind ja asukoht
- Müüja asukoht:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakkia

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A22806440
- Viitenumber:
- 260250
- Värskendus:
- viimati kuupäeval 23.09.2026
Kirjeldus
CLAMPING UNIT
Clamping force: 800 kN
Locking force: 800 kN
Distance between tie bars: 420 x 420 mm
Max. opening stroke: 450 mm
Min. mould height: 250 mm (200 / 175 mm with ZE 214)
Max. distance between platens: 700 mm (750 / 800 mm with WA 211)
Platen size (H x V): 590 x 600 mm
Max. mould weight: 700 kg
Max. mould weight on moving platen: 450 kg
HYDRAULIC EJECTOR
Ejector stroke: 150 mm
Ejector force: 41.2 kN
Ejector retraction force: 14.8 kN
INJECTION UNIT (120)
Screw diameter: 22 mm
Hnedez D U Skepfx Afxsw
L/D ratio: 20
Injection pressure: 2591 bar
Stroke volume: 41.8 cm³
Shot weight (PS): 37 g
Max. dosing stroke: 110 mm
Max. nozzle stroke: 200 mm
Nozzle penetration depth: 40 mm
Nozzle contact force: 60 kN
Barrel heating power: 5.1 kW
Hopper capacity: 35 l
GENERAL
Oil tank capacity: 140 l
Pump motor: 5.5 / 7.5 kW
Total installed power: 10.6 / 12.6 kW
Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm
Net weight (without oil): 2550 kg (2650 kg with full cladding)
Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full
cladding)
Noise level (idle / full load): 56 / 71 dB(A)
Clamping force: 800 kN
Locking force: 800 kN
Distance between tie bars: 420 x 420 mm
Max. opening stroke: 450 mm
Min. mould height: 250 mm (200 / 175 mm with ZE 214)
Max. distance between platens: 700 mm (750 / 800 mm with WA 211)
Platen size (H x V): 590 x 600 mm
Max. mould weight: 700 kg
Max. mould weight on moving platen: 450 kg
HYDRAULIC EJECTOR
Ejector stroke: 150 mm
Ejector force: 41.2 kN
Ejector retraction force: 14.8 kN
INJECTION UNIT (120)
Screw diameter: 22 mm
Hnedez D U Skepfx Afxsw
L/D ratio: 20
Injection pressure: 2591 bar
Stroke volume: 41.8 cm³
Shot weight (PS): 37 g
Max. dosing stroke: 110 mm
Max. nozzle stroke: 200 mm
Nozzle penetration depth: 40 mm
Nozzle contact force: 60 kN
Barrel heating power: 5.1 kW
Hopper capacity: 35 l
GENERAL
Oil tank capacity: 140 l
Pump motor: 5.5 / 7.5 kW
Total installed power: 10.6 / 12.6 kW
Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm
Net weight (without oil): 2550 kg (2650 kg with full cladding)
Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full
cladding)
Noise level (idle / full load): 56 / 71 dB(A)
Teie kuulutus on edukalt kustutatud
Ilmnes viga









