Vertikaalne töötlemiskeskusChiron
Mill 6000
Andmed masina kohta
- Masina nimetus:
- Vertikaalne töötlemiskeskus
- Tootja:
- Chiron
- Mudel:
- Mill 6000
- Masina number:
- 419-01
- Tootmisaasta:
- 2004
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- täielikult töökorras
- Tööajad:
- 77 374 h
Tehnilised andmed
- X-telje liikumisteekond:
- 6 000 mm
- Y-telje liikumisteekond:
- 630 mm
- Kontrolleri mudel:
- Siemens 840D
- Spindli pöörlemiskiirus (maks.):
- 12 000 p/min
ettevõtmine
- Asukoht:
- Baden-Württemberg, Saksamaa
– Kaugus: ca 1 563 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- EXW
tasuta
Kirjeldus
The machine spindle was replaced in 2021 (spindle hours approx. 7,300 h)!
The machine was completely overhauled in 2013!
The machine has undergone regular annual maintenance, repairs, and has been kept up to date technically by the manufacturer (preventive maintenance). The last service was carried out in January 2024.
TECHNICAL DETAILS
4 axes
X-axis travel: 6,000 mm
Y-axis travel: 630 mm
Z-axis travel: 550 mm
B-axis swivel range: ± 100°
Spindle speed: 12,000 rpm
Spindle torque: 140 Nm
Rapid traverse X/Y/Z: 60 m/min
Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN)
Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN)
MACHINE DETAILS
Control system: Siemens 840D
Current type: 3/N/PE
Line frequency: 50/60 Hz
Operating voltage: 400 V
Control voltage: 220/24 V
Connected load: 52 kVA
Rated current: 75 A
Protection: 80 A
Weight: 19,500 kg
Operating hours: 77,374 h
EQUIPMENT
5-axis milling package (up to 5-axis simultaneous milling)
Scraper conveyor, discharge height: 1,050 mm
CIC preparation
Vacuum rotary filter KNOLL VRF250 (steel, cast iron, aluminium, plastic, brass)
High pressure 70 bar with high-pressure pump and variable flow valve
Rinsing gun per pendulum field
Emulsion mist extraction, 2 extraction blowers each 800 m³/h
Rotating viewing window left and right (1,400 mm from machine center)
Automatic loading doors
Central partition for pendulum operation
92 tool holders HSK-A63 (rear magazine)
Blow air
Tool life monitoring
Additional V24 RS232 in control cabinet
BDE/MDE interface (status: machine on, machine running, piece counter)
Marposs (Brankamp) collision monitoring CMS100
3D machine model for kinematic simulation in the CAM programming system
Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring
Linear clamping system KOHN
8 pieces hydraulic vise KOHN Multi 2000 MFS 125/680 HD
Two-piece tread platform for the operator across the entire operating width of 6,000 mm
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Makseviisid:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A22326617
- Viitenumber:
- AUC-2606277
- Värskendus:
- viimati kuupäeval 20.07.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Nürnberg DOOSANPUMA GT 3100 M
Thurmaston Mori SeikiNLX2500SY
Marchtrenk Roll-o-MaticRPG
Auw bei Prüm DMG MORIDMC 60T RS3
Drachten AmadaHFE 400 6 L
Rain TraubTNX 65/42
Saksamaa HESSAPPDV 62
Hövelhof Arthur KlinkRIW 16x1800
Szigetszentmiklós OkumaGenos L300E-MY turning center
Lempäälä Hol-Monta spol.sroUB 85 / 6000 CNC
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-usaldusmärk
Mis on usaldusmärk?
Machineseeker sertifitseerib valitud edasimüüjad Machineseeker usaldusmärgisega. Enne väljastamist teostavad kogenud Machineseeker töötajad standardiseeritud ning põhjaliku kontrolli.
Mida me kontrollime?
Äritegevusloa või äriregistri väljavõtte kontrollimine
Müüja
postiaadressi kontrollimine
Pangakonto andmete valideerimine
Põhinumbri
telefonilise
kättesaadavuse kontrollimine
Majandusinfo
ei tohi sisaldada negatiivseid tunnuseid
Ostjate kaebused
võivad tähendada sertifikaadi äravõtmistMida see teie kui ostja jaoks tähendab?
Tänu Machineseeker usaldusmärgisele saate ostjana ilma enda kontrollita ära tunda usaldusväärseid kaupmehi, kes tõenäoliselt teevad ausat ja seaduskuulekat äri.
Loomulikult võivad ostuprotsessi käigus siiski tekkida erimeelsused. Machineseeker ei vastuta seaduserikkumiste eest, mille panevad toime Machineseeker platvormil aktiivsed ostjad või müüjad.