Hammastuse ümberserva kontrollmasinCadis
81876-50 kN
Põhiandmed
- Masina nimetus:
- Hammastuse ümberserva kontrollmasin
- Tootja:
- Cadis
- Mudel:
- 81876-50 kN
- Masina number:
- 54942
- Tootmisaasta:
- 2025
- Seisund:
- vajab remonti (kasutatud)
- Töövõimekus:
- piiratud funktsionaalsus
ettevõtmine
- Asukoht:
- Nordrhein-Westfalen, Saksamaa
– Kaugus: ca 1 373 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- EXW
tasuta
Kirjeldus
EXW – Dismantling and loading must be organized by the buyer!
TECHNICAL DETAILS
Lajdpfx Aez Tf D Rog Rsh
Nominal test force: 50 kN
Test stroke: < 1,400 mm
Usable distance between pressure plates: approx. 800 mm
Test area width: 500 mm
Test speed: continuously variable 0.001–1,200 mm/min
Resolution of displacement measurement: ≤ 0.001 mm
Diameter of pressure plates: 246 mm
Centering bore: 40 mm
Thread: M12
Hardness: ≥ 56 HRC
Design: Steel, hardened, rotatable at the top and bottom, lockable at 0°
Measuring range of the enveloping circle: 30–250 mm
Design: Probe with bearing rollers
Measurement: Recording under load
MACHINE DETAILS
Control system: Control system with control computer
Test program: Enveloping circle measurement
Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC
Software delivery: USB stick with installation software
Documentation: Version and license status not documented separately
Last calibration: 08/04/2025
Dimensions & Weight
Machine dimensions: approx. 750 × 900 × 1,950 mm
Base frame dimensions: approx. 730 × 900 × 700 mm
Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm
Machine weight: approx. 490 kg
Base frame weight: approx. 50 kg
Voltage supply: 3 × 400 V AC, 50 Hz, N + PE
Type plate power: 3,000 W
Connected power: approx. 3 kVA
EQUIPMENT
Base frame
Control cabinet with control computer
Rotatable pressure plates
Enveloping circle measuring device with probes and bearing rollers
USB stick with installation software
Compressed air connection: Pneumatic connection with shut-off valve
Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually.
The operating PC is not included in the offer.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Makseviisid:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A23007996
- Viitenumber:
- AUC-2610258
- Värskendus:
- viimati kuupäeval 19.10.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Nordrhein-Westfalen GraebenerGK 360
Nordrhein-Westfalen UltimakerS3
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-usaldusmärk
Mis on usaldusmärk?
Machineseeker sertifitseerib valitud edasimüüjad Machineseeker usaldusmärgisega. Enne väljastamist teostavad kogenud Machineseeker töötajad standardiseeritud ning põhjaliku kontrolli.
Mida me kontrollime?
Äritegevusloa või äriregistri väljavõtte kontrollimine
Müüja
postiaadressi kontrollimine
Pangakonto andmete valideerimine
Põhinumbri
telefonilise
kättesaadavuse kontrollimine
Majandusinfo
ei tohi sisaldada negatiivseid tunnuseid
Ostjate kaebused
võivad tähendada sertifikaadi äravõtmistMida see teie kui ostja jaoks tähendab?
Tänu Machineseeker usaldusmärgisele saate ostjana ilma enda kontrollita ära tunda usaldusväärseid kaupmehi, kes tõenäoliselt teevad ausat ja seaduskuulekat äri.
Loomulikult võivad ostuprotsessi käigus siiski tekkida erimeelsused. Machineseeker ei vastuta seaduserikkumiste eest, mille panevad toime Machineseeker platvormil aktiivsed ostjad või müüjad.