Täielik saekaater (statsionaarne)Brenta
Verticale bandzaag / automat. draaiwagen
Täielik saekaater (statsionaarne)
Brenta
Verticale bandzaag / automat. draaiwagen
EXW VB lisandub käibemaks
79 985 €
Tootmisaasta
1986
Seisund
Kasutatud
Asukoht
Beilen 

Pildid näitavad
Kuva kaart
Andmed masina kohta
- Masina nimetus:
- Täielik saekaater (statsionaarne)
- Tootja:
- Brenta
- Tootmisaasta:
- 1986
- Seisund:
- kasutatud
- Töövõimekus:
- täielikult töökorras
Hind ja asukoht
EXW VB lisandub käibemaks
79 985 €
- Asukoht:
- Beilen, Holland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A21600703
- Värskendus:
- viimati kuupäeval 26.03.2026
Kirjeldus
We are offering this used Brenta Vertical Band Saw with automatic turning carriage.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
Hodpfoyxhq Uex Aazok
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Year of manufacture: 1986
Vertical saw:
Type Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm
Saw carriage:
Type Progress 750 Machine no.: 409621 S268 N1143886
Maximum cutting length: 12 meters
In the various photos, you can see:
- overall view of the saw
- saw machine nameplate
- saw with extraction pit
- automatic line behind the saw
- pit under the lower wheel
- infeed line from outside
- infeed line as seen from inside
- outfeed line inside
- extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain
- collection bin behind the outfeed line
- collection bin seen from the other side. With red button operable both here and from the machine room
- overview of the outfeed line
- machine plate of the saw carriage
Hodpfoyxhq Uex Aazok
- saw carriage in the outer position, where the log can be loaded
- control room behind the saw
- control room interior. Electronic measurement setting and control of all infeed and outfeed lines
- wall-mounted electronics across from saw. Control current with relays, which can also be operated manually
- Atlas Copco GX 11 FF compressor
- Compressor nameplate, year of manufacture 2005
- Grass Air DW 31 air dryer
- Stellite adjustment blocks for the guides where the saw blades run through
Technical information:
- The machine must be supplied with air, hydraulics, and electricity (including control current)
- The wheels (upper and lower) were ground approximately three years ago and can last for many more years.
- Infeed conveyor control cabinet was renewed in 2025
- At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment.
This Brenta vertical band saw with automatic turning carriage is an excellent combination.
The listed price is based on the EXW Incoterm, with dismantling by the buyer.
If you have any questions or require further information, please feel free to contact us or give us a call.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Viimati sees: eelmisel nädalal
Registreeritud alates: 2026
1 Kuulutus onlines
Saada päring
Telefon & Faks
+31 6 558... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga










































