ServakantmasinBIESSE
STREAM B1 7.0
Andmed masina kohta
Tehnilised andmed
- Tooriku kõrgus (maks.):
- 60 mm
- Ääre paksus (maks.):
- 3 mm
- X-telje etteandekiirus:
- 25 m/min
- Töölaius:
- 3 200 mm
ettevõtmine
- Asukoht:
- Piemonte, Itaalia
– Kaugus: ca 1 945 km
- Saadavus:
- kohe pärast oksjoni lõppu
- Tingimused tarnimiseks:
- FCA
850,00 € (siduv)
tasuta
Kirjeldus
The machine has the following configuration:
Number of processing units: 8
Pressure beam: With rubber belt
Panel support stop: Available
Top pressure: Available
CNC positioning: Available
Panel infeed trimming system: Available
Number of units in trimming area: 1
Number of units in edge processing area: 6
Trimming unit
Unit: Flush milling unit
Manufacturer/Model: RT30
Automatic timed engagement: Available
Motor power: 3.5 kW
Speed: 9,000 rpm
Edge banding
Glue application system: EVA
Heating lamps for edges: Available
Edge magazine: Roll magazine
Number of magazine positions: 6
Hot-melt glue pot: Available
Hot-melt glue premelter: HM20
Pressure roller unit: Available
Number of pressure rollers: 4
CNC positioning: Available
End trimming unit
Manufacturer/Model: IT90-S
Number of motors: 2
Maximum processing speed: 28 m/min
Motor power: 0.65 kW
Speed: 12,000 rpm
Corner milling unit
Manufacturer/Model: RF10
Number of motors: 2
Motor power: 1 kW
Speed: 12,000 rpm
Corner rounding unit
Manufacturer/Model: AR30
Number of motors: 2
Automatic tool changer: Available
Maximum processing speed: 18 m/min
Motor power: 0.65 kW
Speed: 12,000 rpm
Edge scraper unit
Manufacturer/Model: RB40
CNC positioning: Available
Glue scraper unit
Manufacturer/Model: RC20
Brushing unit
Manufacturer/Model: SZ30
Number of motors: 2
Motor power: 0.37 kW
Speed: 1,400 rpm
TECHNICAL DETAILS
Minimum panel height: 10 mm
Maximum panel height: 60 mm
Minimum panel length: 150 mm
Minimum panel width: 100 mm
Maximum panel width: 3,200 mm
Minimum edge thickness: 0.3 mm
Maximum edge thickness: 3 mm
Maximum feed rate: 25 m/min
MACHINE DETAILS
Electrical connected load: 25 kW
EQUIPMENT
CE conformity
The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing and use of the machine at the destination.
External refere
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Makse töötlemine
- Ostukulud:
- 18 %
- Makse tingimused:
- 100% ettemaks
- Makseviisid:
Ülekanne
Pakkumise üksikasjad
- kuulutuse ID:
- A22814935
- Viitenumber:
- AUC-2609241
- Värskendus:
- viimati kuupäeval 24.09.2026
- Eksklusiivpakkumine:
- ainult oksjonil saadaval
külastus
Piemonte HOLZMAHPL 510/43/22
Piemonte CHAMBONPROFILMAX
Piemonte IMACOMBIMA SYSTEMS/II
Piemonte HOMAGKAL 210/7/A20/S2
Piemonte BARGSTEDTTSH 270/Q/25/12
Piemonte PACKSIZEEMSIZE FM 6
Piemonte HOMAGBOF 211/40/AP
Piemonte KÜNDIGECO
Piemonte Bre.Ma.VEKTOR 25-13
Piemonte HOMAGTWL 31/25/12
Piemonte VITAPECLIPSE
Piemonte HOMAGBOF 322/60/F/AP PROFILINE
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-usaldusmärk
Mis on usaldusmärk?
Machineseeker sertifitseerib valitud edasimüüjad Machineseeker usaldusmärgisega. Enne väljastamist teostavad kogenud Machineseeker töötajad standardiseeritud ning põhjaliku kontrolli.
Mida me kontrollime?
Äritegevusloa või äriregistri väljavõtte kontrollimine
Müüja
postiaadressi kontrollimine
Pangakonto andmete valideerimine
Põhinumbri
telefonilise
kättesaadavuse kontrollimine
Majandusinfo
ei tohi sisaldada negatiivseid tunnuseid
Ostjate kaebused
võivad tähendada sertifikaadi äravõtmistMida see teie kui ostja jaoks tähendab?
Tänu Machineseeker usaldusmärgisele saate ostjana ilma enda kontrollita ära tunda usaldusväärseid kaupmehi, kes tõenäoliselt teevad ausat ja seaduskuulekat äri.
Loomulikult võivad ostuprotsessi käigus siiski tekkida erimeelsused. Machineseeker ei vastuta seaduserikkumiste eest, mille panevad toime Machineseeker platvormil aktiivsed ostjad või müüjad.