PakendamismasinBecker
BZ-2
Pakendamismasin
Becker
BZ-2
Tootmisaasta
2020
Seisund
Kasutatud
Asukoht
Oberweis 

Andmed masina kohta
Hind ja asukoht
- Asukoht:
- Gewerbegebiet Süd 6, 4664 Laakirchen, Österreich

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A21142922
- Viitenumber:
- 200101
- Värskendus:
- viimati kuupäeval 15.04.2026
Kirjeldus
Becker BZ-2 - Packaging System
- 2 identical, mirror-inverted packaging lines available
- without cutting machine
- Year of manufacture: 2020
The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine.
The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line.
The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system.
Machine components (see schematic):
Bwedpfx Akoygipmjxon
(1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Packaging Dimensions (top closure):
- min. carton dimensions LxWxH: 500 x 120 x 100 mm
- max. carton dimensions LxWxH: 2250 x 420 x 320 mm
- max. product weight: 50 kg
Packaging Dimensions (side closure):
- min. carton dimensions LxWxH: 300 x 150 x 120 mm
- max. carton dimensions LxWxH: 1050 x 620 x 470 mm
- max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
- 2 identical, mirror-inverted packaging lines available
- without cutting machine
- Year of manufacture: 2020
The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine.
The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line.
The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system.
Machine components (see schematic):
Bwedpfx Akoygipmjxon
(1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor
Technical Data:
Packaging Dimensions (top closure):
- min. carton dimensions LxWxH: 500 x 120 x 100 mm
- max. carton dimensions LxWxH: 2250 x 420 x 320 mm
- max. product weight: 50 kg
Packaging Dimensions (side closure):
- min. carton dimensions LxWxH: 300 x 150 x 120 mm
- max. carton dimensions LxWxH: 1050 x 620 x 470 mm
- max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
- Sound pressure level: < 70 dB(A)
- Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Dokumendid
Need kuulutused võivad samuti teile huvi pakkuda.
Väike kuulutus
Eesti
0 km
Töötlemiskeskus
TeknaTKE783
TeknaTKE783
Väike kuulutus
Ukmergė
373 km
Automaatne kaubaaluste väljastusseade, virnastaja
UMP TechnikaPD-10
UMP TechnikaPD-10
Väike kuulutus
Menslage
1 255 km
GM Gera ARCADE GEL 6 RV1-VL 362/110-30 pudelitepuhastusmasin (2010)
GM GeraFlaschenreinigungsmaschine
GM GeraFlaschenreinigungsmaschine
Väike kuulutus
Krško
1 545 km
Vaakumkahanemismasin
MultivacT350
MultivacT350
Väike kuulutus
Root
1 688 km
Termovormimisliin
MULTIVACR 245
MULTIVACR 245
Väike kuulutus
Rogatec
1 512 km
Heeliumi lekkedetektor
Pfeiffer vacuumadixen ASM 340
Pfeiffer vacuumadixen ASM 340
Väike kuulutus
Thisted
982 km
Standardimisüksus Compomaster
APVKCC
APVKCC
Väike kuulutus
Saksamaa
1 242 km
Pulberkuivati
SPX FlowAnhydro/APV Type II K
SPX FlowAnhydro/APV Type II K
Väike kuulutus
Šveits
1 737 km
Kasutatud CIP Tetra Pak, tootmisaasta 2010, 15 t/h
Tetra Pak®Tetra Alcip 1
Tetra Pak®Tetra Alcip 1
Väike kuulutus
Möckmühl
1 451 km
Termovorming masin
GEISST7 DU 1500x1000x620 Siemens
GEISST7 DU 1500x1000x620 Siemens
Teie kuulutus on edukalt kustutatud
Ilmnes viga














































































































