Pelletide lõikurAccrapack Systems LTD
Series 750 Pelletizer
Pelletide lõikur
Accrapack Systems LTD
Series 750 Pelletizer
FCA VB lisandub käibemaks
6 500 €
Tootmisaasta
2011
Seisund
Kasutatud
(piiratud funktsionaalsus)
Asukoht
Bergen op Zoom 

Põhiandmed
- Masina nimetus:
- Pelletide lõikur
- Tootja:
- Accrapack Systems LTD
- Mudel:
- Series 750 Pelletizer
- Tootmisaasta:
- 2011
- Seisund:
- töövalmis (kasutatud)
- Töövõimekus:
- piiratud funktsionaalsus
Hind ja asukoht
FCA VB lisandub käibemaks
6 500 €
- Asukoht:
- Bergen op Zoom, Holland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A23348531
- Värskendus:
- viimati kuupäeval 17.11.2026
Kirjeldus
The Accrapak Systems Ltd Series 750 is a compact, base-mounted dry-cutting strand granulation and downstream system for thermoplastic materials.
Ijdo Akvlxepfx Akieii
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Ijdo Akvlxepfx Akieii
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Pakkuja
Märkus: Registreeru tasuta või logi sisse, et saada kogu teave.
Viimati sees: eelmisel nädalal
Registreeritud alates: 2026
19 Kuulutused internetis
Saada päring
Telefon & Faks
+43 660 2... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga
































