PainutuspinkBluhm Systeme
e-SolarMark FL
Painutuspink
Bluhm Systeme
e-SolarMark FL
fikseeritud hind lisandub käibemaks
4 800 €
Seisund
Kasutatud
Asukoht
Borken 

Andmed masina kohta
- Masina nimetus:
- Painutuspink
- Tootja:
- Bluhm Systeme
- Mudel:
- e-SolarMark FL
- Seisund:
- kontrollimata (kasutatud)
Hind ja asukoht
fikseeritud hind lisandub käibemaks
4 800 €
- Asukoht:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Helistada
Pakkumise üksikasjad
- kuulutuse ID:
- A22186232
- Viitenumber:
- 23922
- Värskendus:
- viimati kuupäeval 23.06.2026
Kirjeldus
Bluhm Systems Marking Laser
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
Pedpfozgci Eox An Eepu
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Here we offer a Bluhm Systems marking laser.
Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
Pedpfozgci Eox An Eepu
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser specification in standard configuration
Laser type: Fiber laser
Laser output power: FL2 model: 19W; typical
Wavelength: 1062 nm typical
Internal modulation: 20 to 80 kHz
Scanner head description:
Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens types and their properties:
Lens marking field: 70x70 mm to 300 x 300 mm
Focal length: B 192 mm
Operating environment conditions:
Relative humidity: up to 80%, non-condensing
Operating temperature: 5 - 40°C
Recommended operating temperature: 15-25°C
Dimensions W x H x D
Laser unit: 122 x 108 x 495 mm
Control unit: 520 x 380 x 215 mm
Cable length, marking/control unit: 3 m
Weight, marking unit: 5 kg
Weight, control unit: 15 kg
Mains voltage
115/230 VAC, 50/60 Hz, single-phase.
Power consumption, FL2 model: 450W
Type: e-SolarMark FL
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.
Kuulutus tõlgiti automaatselt. Tõlkevigu võib esineda.
Saada päring
Telefon & Faks
+49 2861 ... kuulutused
Teie kuulutus on edukalt kustutatud
Ilmnes viga





















